AKAR 812-320 Pneumatic Valve and Pressure-Reducing Valve Fabric-Reinforced Rubber Diaphragm

AKAR 812-320 Pneumatic Valve and Pressure-Reducing Valve Fabric-Reinforced Rubber Diaphragm. Confirm fitment before ordering.

Request a Quote

SKU: 812-320 Category:

Description

AKAR 812-320 Pneumatic Valve and Pressure-Reducing Valve Fabric-Reinforced Rubber Diaphragm. Match the original part to the required equipment configuration before requesting a replacement.

Request a Quote

Technical Data

Confirm the full model, the original part markings and the installed dimensions before ordering. Parts or configurations shown together are not necessarily interchangeable.

Component and Equipment Reference

Series reference only. Fitment to the listed replacement is not independently verified. ARCA ARCAPAQ 812 pneumatic actuators; AKAR listing fitment unconfirmed. Equipment ratings are not replacement-part ratings.

ARCAPAQ 812 Actuator Family Technical Data

Parameter Family Reference
Effective diaphragm area MFI 320 cm²; MFIII 720 cm²
Stroke 20–60 mm, configuration-specific
Maximum control signal 6 bar
Diaphragm Moulded fabric-reinforced NBR
Operating temperature −20 to +80 °C; optional −40 to +80 °C
Spring count MFI 3–7; MFIII 3–12
Air connections Z1 G1/8; Z2 MFI G1/8 or MFIII G1/4
Maximum spring / air control force 4.8–22 / 14.4–35.2 kN, size/configuration-dependent

ARCAPAQ 812 Family Air-to-Open Spring Selection

Size / Area (cm²) Actuator Type Spring Count Stroke (mm) Bench Range (bar) Control Force (kN)
MFI-20 / 320 812-213.. / 812-223.. 3 20 0.75–1.5 2.4
MFI-20 / 320 812-213.. / 812-223.. 6 20 1.5–3.0 4.8
MFI-20(v) / 320 812-224.. 3 20 1.0–1.5 3.2
MFI-20(v) / 320 812-224.. 6 20 2.0–3.0 6.4
MFI-20(v) / 320 812-224.. 7 20 2.3–3.5 7.4
MFI-30 / 320 812-234.. 3 30 0.75–1.5 2.4
MFI-30 / 320 812-234.. 6 30 1.5–3.0 4.8
MFIII-30 / 720 812-334.. 3 30 0.7–1.5 5
MFIII-30 / 720 812-334.. 6 30 1.5–3.0 10
MFIII-30 / 720 812-334.. 9 30 1.8–3.7 13
MFIII-30 / 720 812-334.. 12 30 2.2–4.4 16
MFIII-30(v) / 720 812-336.. 3 30 1.1–1.5 7.5
MFIII-30(v) / 720 812-336.. 6 30 2.2–3.0 15
MFIII-30(v) / 720 812-336.. 9 30 2.7–3.6 19
MFIII-30(v) / 720 812-336.. 12 30 3.2–4.3 22
MFIII-60 / 720 812-346.. 3 60 0.7–1.5 5
MFIII-60 / 720 812-346.. 6 60 1.4–3.0 10
MFIII-60 / 720 812-346.. 9 60 1.7–3.6 12
MFIII-60 / 720 812-346.. 12 60 2.0–4.3 14

ARCAPAQ 812 Family Air-to-Close Force Reference

Size / Area (cm²) Actuator Type Springs / Stroke (mm) Minimum Pressure (bar) Force at 2 / 3 / 4 bar (kN) Force at 5 / 6 bar (kN)
MFI-20 / 320 812-213.. / 812-223.. 3 / 20 1.5 1.6 / 4.8 / 8.0 11.2 / 14.4
MFI-20 / 320 812-213.. / 812-223.. 6 / 20 3.0 — / — / 3.2 6.4 / 9.6
MFI-20(v) / 320 812-224.. 3 / 20 1.5 — / 4.8 / 8.0 11.2 / 14.4
MFI-20(v) / 320 812-224.. 6 / 20 3.0 — / — / 3.2 6.4 / 9.6
MFI-20(v) / 320 812-224.. 7 / 20 3.5 — / — / 1.6 4.8 / 8.0
MFI-30 / 320 812-234.. 3 / 30 1.5 1.6 / 4.8 / 8.0 11.2 / 14.4
MFI-30 / 320 812-234.. 6 / 30 3.0 — / — / 3.2 6.4 / 9.6
MFIII-30 / 720 812-334.. 3 / 30 1.5 3.6 / 10.8 / 18 25.2 / 32.4
MFIII-30 / 720 812-334.. 6 / 30 3.0 — / — / 7.2 14.4 / 21.6
MFIII-30 / 720 812-334.. 9 / 30 3.7 — / — / 2.2 9.4 / 16.6
MFIII-30 / 720 812-334.. 12 / 30 4.4 — / — / — 4.3 / 11.5
MFIII-30(v) / 720 812-336.. 3 / 30 1.1 6.4 / 13.6 / 20.8 28 / 35.2
MFIII-30(v) / 720 812-336.. 6 / 30 2.2 — / 5.7 / 12.9 20.1 / 27.3
MFIII-30(v) / 720 812-336.. 9 / 30 2.6 — / 2.8 / 10 17.2 / 24.4
MFIII-30(v) / 720 812-336.. 12 / 30 3.1 — / — / 6.4 13.6 / 20.8
MFIII-60 / 720 812-346.. 3 / 60 1.5 3.6 / 10.8 / 18 25.2 / 32.4
MFIII-60 / 720 812-346.. 6 / 60 3.0 — / — / 7.2 14.4 / 21.6
MFIII-60 / 720 812-346.. 9 / 60 3.6 — / — / 2.9 10.1 / 17.3
MFIII-60 / 720 812-346.. 12 / 60 4.3 — / — / — 5.0 / 12.2

ARCAPAQ 812 Family Assembly Dimensions

Size / Type Stroke (mm) D / d / S (mm) A / B (mm) H / HV / R (mm) Stem Thread
MFI-20 / 812-213.. 20 270 / 40 / 20 120 / 180 361 / 508 / 220 M14
MFI-20 / 812-223.. 20 270 / 48 / 20 120 / 180 361 / 508 / 220 M14
MFI-20(v) / 812-224.. 20 270 / 48 / 20 120 / 180 381 / 528 / 220 M14
MFI-30 / 812-234.. 30 270 / 56 / 25 142 / 203 404 / 551 / 220 M14
MFIII-30 / 812-334.. 30 400 / 56 / 25 142 / 251 489 / 651 / 335 M20x1.5
MFIII-30(v) / 812-336.. 30 400 / 56 / 25 142 / 251 551 / 814 / 335 M20x1.5
MFIII-60 / 812-346.. 60 400 / 72 / 30 192 / 309 625 / 888 / 335 M20x1.5

ARCAPAQ 812 Family Configuration Code Reference

Code Field Code Meaning
size 2 MFI 320 cm2
size 3 MFIII 720 cm2
yoke_adapter 0 without
yoke_adapter 1 40 mm
yoke_adapter 2 48 mm
yoke_adapter 3 56 mm
yoke_adapter 4 72 mm
yoke_adapter 9 special
stroke_labelled_Hub 3 20 mm
stroke_labelled_Hub 4 30 mm
stroke_labelled_Hub 6 60 mm
spring_set 3 3
spring_set 6 6
spring_set 7 7
spring_set 9 9
spring_set 0 12
chamber_material N steel head/steel yoke
chamber_material A steel head/stainless yoke
chamber_material V stainless head/stainless yoke
function O springs stem downward, air to open
function S springs stem upward, air to close
execution B reversible without spring purge
execution E reversible with integrated spring purge
extras 0 without
extras 1 opening-direction stroke limitation
extras 4 low temperature -40 C
extras 5 G1/2 air connection
extras 6 long stainless screws
extras AP outer stainless parts passivated
extras B stroke limitation adjustable both O/S directions
extras EXG explosion-proof gas Zones 1/2
extras EXD dust/gas Zones 21/22 plus 1/2
extras FG spring cover rotated 180 degrees
extras S on/off actuator
extras SD Duplex 1.4462 stem, includes 6
extras V preloaded actuator
extras VB VDI/VDE mounting, includes 6 and FG
extras X XYLAN-coated peripheral bolting
extras Z ASME peripheral bolting
handwheel blank without
handwheel HV with handwheel; cannot combine with 1 or B

Actuator Family Compatibility Boundary

The ARCAPAQ 812 documentation describes an ARCA pneumatic actuator. The listing spelling AKAR and reference 812-320 must be matched against the installed equipment. A 320 cm² effective diaphragm area does not establish a 320 mm outside diameter. Verify reinforcement, connection and spring-action configuration before selecting a replacement.

ARCAPAQ Construction and Function

ARCAPAQ pneumatic multi-spring diaphragm actuator with spring return/fail-safe operates linear valves. Positions valve plug according to diaphragm signal pressure controlled by pneumatic or electro-pneumatic positioner; air-to-open or air-to-close operation. Compact low-height design; spring sets with different bench ranges adapt to operating conditions. Fabric-reinforced rolling diaphragm converts pneumatic pressure into linear stem motion. Supported by diaphragm plate and connected to stem, it separates pressure and spring chambers. Stem moves when signal-pressure force exceeds spring force. Signal pressure travels through internal yoke channels; spring chamber vents through splash-water-resistant protective cap. Optional purge with positioner instrument air through internal channels or external tubing. Yoke connects actuator to valve; coupling joins actuator and valve stems and acts as stroke indicator. Slide bearing guides stem; special sealing element and wiper ring provide sealing.

Actuator Table Boundary

These selection tables describe actuators without a valve at nominal stroke. Spring action, preload and pressure determine available force. Assembly drawing dimensions are not replacement-diaphragm diameters. Confirm the original actuator type and replacement mounting pattern.

Configuration Example

812-2233N-OB0-HV is an illustrative configured actuator code. Its spring set, stroke, materials and handwheel options must not be inferred for the listing reference 812-320.

Selection and Inquiry

Send the equipment nameplate, complete model, measurements and quantity. Check fastening, material and service conditions against the original part.

Request a Quote

Browse Pump Repair Kits.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.