E505TF VERSA-MATIC Diaphragm Pump Replacement PTFE Diaphragm
E505TF VERSA-MATIC Diaphragm Pump Replacement PTFE Diaphragm. Confirm fitment before ordering.
Description
E505TF VERSA-MATIC Diaphragm Pump Replacement PTFE Diaphragm. Match the original part to the required equipment configuration before requesting a replacement.
Technical Data
Confirm the full model, the original part markings and the installed dimensions before ordering. Parts or configurations shown together are not necessarily interchangeable.
Component and Equipment Reference
E5 Pump Assembly Parts Reference — Quantities per Complete Pump
| Item | Quantity per Pump | Description | Part Reference |
|---|---|---|---|
| air side kit | — | includes 3,4,6,8-10,13-17,20 | 476.V007.000 |
| air valve assembly | 1 | Valve body includes 1-11 | 031.V004.552 |
| 1 | 1 | Valve body | PE500A |
| 2 | 1 | Valve spool assembly includes 3&4 | E500BUB ASY |
| 3 | 1 | Large valve spool U-cup | P98-104A |
| 4 | 1 | Small valve spool U-cup | P98-104AUB |
| 5 | 1 | End cap assembly includes O-ring | E500D ASY |
| 6 | 1 | Reducing end cap assembly includes 560.0580.360 O-rings as printed | E500DUB ASY |
| 7 | 2 | Staple | E500F |
| 8 | 1 | CT air diverter | 10-075 |
| 9 | 1 | Air diverter plate | E500H |
| 10 | 1 | Air valve gasket | 360.V003.360 |
| 11 | 4 | Valve mounting screws | S1004 |
| 12 | 1 | Center section | E501A |
| pilot kit | — | includes 13-17 | 476.V006.000 |
| 13 | 1 | Pilot spool assembly includes 14 | 775.V003.000 |
| 14 | 8 | Pilot spool O-rings | 560.023.358 |
| 15 | 1 | Pilot valve sleeve assembly includes 16 | 755.V003.000 |
| 16 | 6 | Pilot valve sleeve O-rings | 560.033.358 |
| 17 | 2 | Shaft/pilot retainer | 670.V001.554 |
| 18 | 4 | Retainer screw | E501C |
| 19 | 1 | Muffler | 530.061.000 |
| 20 | 2 | Main shaft O-ring | E502B |
| 21 | 1 | Main shaft | E502A |
| 22 | 2 | FDA Hytrel TPE diaphragm | E505FG |
| 22 | 2 | FDA Santoprene TPE diaphragm | E505XLFG |
| 22 | 2 | PTFE2-piece diaphragm | E505TF |
| 22 | 2 | PTFE Fusion diaphragm | E505F |
| 23 | 2 | Backup diaphragm PTFE2-piece only; othersN/A | E505N |
| 24 | 2 | Inner diaphragm plate; FusionN/A | V199C |
| 25 | 2 | Outer diaphragm plate; FusionN/A | SV199BFG |
| 26 | 4 | Valve seat O-ring | V110HT |
| 27 | 4 | Valve ball; merged material columns not individually assigned | V111TPEFG / V111TF |
| 28 | 2 | Water chamber | E504SFG |
| 29 | 16 | Water chamber bolt | 171.064.115 |
| 31 | 16 | Water chamber nut | SV185B |
| 32 | 4 | Valve seat | SV110 |
| 33 | 1 | Discharge manifold | SV196FG |
| 34 | 1 | Suction manifold | SV197FG |
| 35 | 8 | Manifold bolts | 171.066.115 |
| 37 | 8 | Manifold nut | SV197E |
| 38 | 4 | Mounting foot | 350.002.360 |
| 39 | 4 | Hex nut | 547.002.110 |
| 40 | 4 | Machine screw | 706.024.115 |
| 41 | 4 | Flat washer | 901.035.115 |
E5 Complete-Pump Performance Reference
| Parameter | TPE-Fitted Pump | PTFE-Fitted Pump |
|---|---|---|
| adjustable flow | 0-12 US gpm /45.4 L/min | 0-11 US gpm /41.6 L/min |
| suction/discharge ports | 1-1/2-inch Tri-Clamp | same |
| air inlet/exhaust | 3/8-inch NPT | same |
| dry lift | 13ft/3.9m | 12ft/3.6m |
| wet lift | 22ft/6.7m | same |
| maximum solid diameter | 1/16inch/1.6mm | same |
| maximum noise | 84dBA | 87dBA |
| stainless shipping weight | 17lb/7.7kg | same |
| displacement per stroke | 0.022USgal/0.08L | 0.019USgal/0.07L |
E5 Pump Configuration Code Reference
| category | code | meaning |
|---|---|---|
| model | E | Elima-Matic |
| size | 5 | 1/2 inch |
| wetted parts | S | stainless steel |
| non-wetted parts | P | polypropylene |
| diaphragm | 5F | PTFE/Fusion |
| diaphragm | 5T | PTFE Tef-Matic 2-piece |
| diaphragm | YX | FDA Santo/XL Thermo-Matic |
| diaphragm | 7X | Hytrel Thermo-Matic |
| valve ball | 5 | PTFE |
| valve ball | 6 | Santoprene XL |
| valve ball | 7 | FDA Hytrel |
| seat/seat O-ring | 5 | PTFE |
| construction | 9 | bolted |
| design level | C | C |
| option | FP | Food Processing |
Generic Material Guide — Confirm Complete-Pump Limit
| material | description | minimum_F_C | maximum_F_C |
|---|---|---|---|
| Conductive acetal | Tough, impact resistant, ductile, abrasion-resistant low-friction surface; generally inert except strong acids/oxidizers | -20/-29 | 190/88 |
| EPDM | Very good water/chemical resistance; poor oils/solvents; fair ketones/alcohols | -40/-40 | 280/138 |
| FKM | Resists many oils/solvents, aliphatic/aromatic/halogenated hydrocarbons, acids, animal/vegetable oils; hot water/aqueous solutions above70F attack FKM | -40/-40 | 350/177 |
| Hytrel | Acids, bases, amines, glycols at room temperature only | -20/-29 | 220/104 |
| Neoprene | General purpose; vegetable oils, moderate chemicals, fats, grease, many oils/solvents; attacked by strong oxidizing acids, ketones, esters, nitro hydrocarbons, chlorinated aromatics | -10/-23 | 200/93 |
| Nitrile | General oil-resistant; good solvents/oils/water/hydraulic fluids; avoid highly polar solvents acetone/MEK, ozone, chlorinated/nitro hydrocarbons | -10/-23 | 190/88 |
| Nylon6/6 | High strength/toughness over broad temperature; moderate-good fuel/oil/chemical resistance | 32/0 | 180/82 |
| Polypropylene | Thermoplastic, moderate tensile/flex strength; strong acids/alkalis resistance; attacked by chlorine, fuming nitric acid, strong oxidizers | 32/0 | 180/82 |
| PVDF | Durable fluoroplastic; excellent chemical/UV resistance and tensile/impact strength | 0/-18 | 250/121 |
| Santoprene | Injection-moulded thermoplastic elastomer without fabric layer; long flex life, excellent abrasion resistance | -40/-40 | 275/135 |
| UHMW PE | Broad chemical resistance, outstanding abrasion/impact/environmental stress-cracking resistance | -35/-37 | 180/82 |
| Urethane | Good abrasion resistance; poor most solvents/oils | 32/0 | 150/66 |
| Virgin PTFE PFA/TFE | Chemically inert, virtually impervious; exceptions molten alkali metals, turbulent liquid/gaseous fluorine, some fluorochemicals liberating free fluorine at high temperature | -35/-37 | 220/104 |
E5 Parts Material Code Reference
| Final Three Digits | Material / Meaning |
|---|---|
| 000 | assembly/subassembly/some purchased items |
| 010 | cast iron |
| 015 | ductile iron |
| 020 | ferritic malleable iron |
| 080 | AISI B-1112 carbon steel |
| 110 | 316 stainless steel |
| 111 | electropolished316 stainless |
| 112 | Alloy C |
| 113 | hand-polished316 stainless |
| 114 | 303 stainless |
| 115 | 302/304 stainless |
| 117 | martensitic440-C stainless |
| 120 | wrought-martensitic416 stainless |
| 148 | hardcoat anodized aluminum |
| 150 | 6061-T6 aluminum |
| 152 | 2024-T4 aluminum (2023-T351 as printed) |
| 155 | 356-T6 aluminum |
| 156 | 356-T6 aluminum |
| 157 | die-cast aluminum alloy380 |
| 158 | aluminum SR-319 |
| 162 | yellow screw-machine brass |
| 165 | cast bronze85-5-5-5 |
| 166 | SAE660 bronze |
| 170 | oil-impregnated bearing bronze |
| 180 | copper alloy |
| 305 | black epoxy-coated carbon steel |
| 306 | black PTFE-coated carbon steel |
| 307 | black epoxy-coated aluminum |
| 308 | black PTFE-coated stainless |
| 309 | black PTFE-coated aluminum |
| 313 | white epoxy-coated aluminum |
| 330 | zinc-plated steel |
| 332 | electroless nickel-plated aluminum |
| 333 | electroless nickel-plated carbon steel |
| 335 | galvanized steel |
| 337 | silver-plated steel |
| 351 | food-grade Santoprene |
| 353 | Geolast black |
| 354 | injection-moulded#203-40 Santoprene40D+/-5 red |
| 356 | Hytrel |
| 357 | injection-moulded polyurethane |
| 358 | urethane rubber, some applications compression mould |
| 359 | urethane rubber |
| 360 | nitrile rubber red |
| 363 | FKM yellow |
| 364 | EPDM blue |
| 365 | neoprene green |
| 366 | food-grade nitrile |
| 368 | food-grade EPDM |
| 371 | Philthane/Tuftane |
| 374 | carboxylated nitrile |
| 375 | fluorinated nitrile |
| 378 | high-density polypropylene |
| 379 | conductive nitrile |
| 408 | cork/neoprene |
| 425 | compressed fibre |
| 426 | Blue Gard |
| 440 | vegetable fibre |
| 500 | Delrin500 |
| 502 | conductive acetal ESD-800 |
| 503 | conductive glass-filled acetal |
| 506 | Delrin150 |
| 520 | injection-moulded natural PVDF |
| 540 | nylon |
| 542 | nylon |
| 544 | injection-moulded nylon |
| 550 | polyethylene |
| 551 | glass-filled polypropylene |
| 552 | unfilled polypropylene |
| 555 | PVC |
| 556 | black vinyl |
| 558 | conductive HDPE |
| 570 | RulonII |
| 580 | Ryton |
| 600 | virgin PTFE/TFE |
| 603 | Blue Gylon |
| 604 | PTFE |
| 606 | PTFE |
| 607 | Envelon |
| 608 | conductive PTFE |
| 610 | PTFE-encapsulated silicon, as printed |
| 611 | PTFE-encapsulated FKM |
| 632 | neoprene/Hytrel |
| 633 | FKM/PTFE |
| 634 | EPDM/PTFE |
| 635 | neoprene/PTFE |
| 637 | PTFE, FKM/PTFE |
| 638 | PTFE, Hytrel/PTFE |
| 639 | nitrile/TFE |
| 643 | Santoprene/EPDM |
| 644 | Santoprene/PTFE |
| 656 | Santoprene diaphragm/check balls with EPDM seats |
| 661 | EPDM/Santoprene |
| 666 | FDA nitrile diaphragm, PTFE overlay/balls/seals |
| 668 | PTFE, FDA Santoprene/PTFE |
PTFE Diaphragm Identification
E505TF is listed as a PTFE two-piece diaphragm at position 22, with two diaphragms per complete pump. This is a service quantity and does not define the quantity supplied by this listing. E505FG, E505XLFG and E505F are separate material or construction options. E505N is a backing reference, not an interchangeable E505TF order number.
Diaphragm Pump Operation and Installation
The pump uses compressed air or nitrogen to pressurise alternating inner chambers. Linked diaphragms discharge liquid from one side and create suction on the other; checks determine liquid direction. Keep suction lines short and adequately sized, support piping, and regulate air supply. Standard air operation requires no lubrication. If submerged, confirm material compatibility and route exhaust above liquid level.
Diaphragm Service and Troubleshooting
Liquid at the exhaust can indicate diaphragm damage or loose/damaged plates. Premature failure can result from cavitation, excessive flooded suction, incompatible chemicals or temperature, incorrect plates or installation. Isolate and depressurise before maintenance; flush hazardous liquids and route exhaust to containment where necessary. Retighten fasteners after gasket creep and follow the assembly-specific torque instructions.
Food-Contact and Certification Boundary
Food-contact declarations apply only to specified complete-pump configurations and conditions. The listed PTFE and FKM/PTFE food-contact plastics are subject to stated contact conditions including a maximum 30-minute storage contact and 40 °C temperature, as well as the manual limits. A rupture can expose other materials. Complete-pump declarations do not independently certify an unidentified aftermarket diaphragm.
Selection and Inquiry
Send the equipment nameplate, complete model, measurements and quantity. Check fastening, material and service conditions against the original part.
Browse Pump Repair Kits.
Maintenance Inspection
Before replacing E505TF, examine the existing installation for issues that may affect the new part. Check the original label, ports, seals, fittings, cables, and mounting points as applicable. Finding a leak, worn connection, or loose contact before installation can help avoid repeating the same problem after replacement.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.









