IMI Norgren 11-818-110 11-818 Series Precision Pressure Regulator
IMI Norgren 11-818-110 is the high-pressure 11-818 Series precision compressed-air regulator, with G1/4 ports and a 0.4-10 bar outlet adjustment range.
Description
IMI Norgren 11-818-110 is the high-pressure 11-818 Series precision compressed-air regulator, with G1/4 ports and a 0.4-10 bar outlet adjustment range.
Product Identification
| Model | 11-818-110 |
|---|---|
| Series | 11-818 |
| Ports | G1/4 |
| Adjustment range | 0.4-10 bar |
Inquiry
Send the full part number, required quantity and a photo of the existing part or its label so the required version can be checked.
11-818-110 Model Configuration
| Parameter | Value |
|---|---|
| Regulation range | 0.4-10 bar (5.8-145 psi) |
| Maximum inlet pressure | 14 bar (203 psi) |
| Accuracy, typical | 0.05 bar at mid-range; 7 bar inlet and 2 dm³/s |
| Relieving | Standard |
| Gauge port | None on this model |
| Tamper-proof screw | Not listed for this model |
| Mass | 0.64 kg |
Air Supply, Temperatures and Materials
| Parameter | Value |
|---|---|
| Medium | Oil-free compressed air; 5 µm prefiltration required |
| Ambient and medium temperature | 0 to +70 °C (no-gauge version) |
| Body and bonnet | Zinc alloy |
| Adjusting knob | Acetal resin |
| Elastomers | NBR |
High-Pressure Variant Curve Reference
| Parameter | Value |
|---|---|
| Flow curve test inlet | 14 bar |
| Regulating curve nominal outlet levels | Approximately 6.3, 8 and 10 bar; curves are operating examples, not a flow rating |
| Pressure range of plotted variant | 0.4-10 bar |
Mounting Dimensions
| Parameter | Value |
|---|---|
| Body footprint | 54 × 54 mm |
| Height shown | 127 mm |
| Knob diameter shown | 43 mm |
| Panel hole | Greater than 12 mm diameter |
| Panel thickness | Less than 6 mm |
Separate Mounting and Service References
| Parameter | Value |
|---|---|
| Bracket | D50159014 |
| High-pressure service kit | 2787-97 |
| Gauge accessories | For gauge-port versions; 11-818-110 has no gauge port. Accessories are not represented as included. |
Pilot-Operated Regulation
The compact regulator incorporates an integral pilot for close pressure control and has provision for panel mounting.
Relief and Dead-End Use
This is not a constant-bleed device. Air bleed is effective under zero-flow conditions, and this series is not recommended for dead-end applications.
Compressed-Air Quality
Use oil-free compressed air and 5 µm prefiltration. Below +2 °C, the air supply must be dry enough to prevent ice formation.
Flow Curve Selection
Use the high-pressure curves when comparing outlet pressure across demand and inlet variations. The standard and low-pressure curves describe different variants.
Gauge Port and Service Parts
Do not assume a gauge port or gauge is included. The drawing limits the gauge port to the listed gauge-port variants; the high-pressure service kit is a separate part.
Functional Check After Replacement
After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.
Additional information
| Model | 11-818-110 |
|---|---|
| Series | 11-818 |
| Ports | G1/4 |
| Adjustment range | 0.4-10 bar |









