IMI Norgren 0882300 18D G1/4 Hydraulic Pressure Switch, 25 to 250 bar

Norgren 0882300 combines a G1/4 hydraulic inlet, a 25 to 250 bar setpoint band and a DIN Form A connector.

Request a Quote

SKU: 0882300 Category: Tags: , Brand:

Description

The pressure range does not establish electrical load capability. Check whether the switch feeds a controller input or switches an inductive device.

Request a Quote

0882300 Configuration

Model 0882300
Marked model 0882300
Pressure connection G1/4
Setpoint range 25 to 250 bar
Electrical interface DIN Form A SPDT
Fixed range-end switching differences 11 and 17 bar
Marked Pmax 400 bar

Selection Notes for 0882300

Use the Form A contact and current values for circuit review, with appropriate load protection when the switch is connected to an inductive load.

Form A Load and Changeover

Electrical check Published value
Closes on rising pressure Terminals 1 to 3
Opens on rising pressure Terminals 1 to 2
Persistent AC current at listed voltages 0.1 A at 30, 48, 125 and 250 V AC
Persistent DC current at listed voltage 0.1 A at 30 V DC

25 to 250 bar Threaded Pressure-Sensor Construction

Selection criterion Catalogue information
Catalogue row with ISO G code 0882300
Pressure-sensor body Aluminium and steel
Pressure-sensor seals PTFE and NBR
Pressure-sensing element Soft-seal piston
Catalogue ambient and media temperature -25 to +80 degrees C

Electrical Reference Conditions

The catalogue references 20 operations per minute at 20 degrees C and calls for spark quenching or overload protection for inductive loads. The AC voltage marking is not a DC rating.

Check Fluid and Temperature Together

The hydraulic datasheet specifies neutral self-lubricating fluids up to 1000 mm2/s. The 25 to 250 bar adjustment range alone does not establish compatibility with the fluid in the installation.

Spare Parts Records

Keeping a clear record of installed components can make future maintenance and purchasing more efficient. For this product, record the brand, full model code, important specifications, and equipment location. Update the record whenever a component or machine configuration changes, so the next replacement decision is based on current information.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Model

0882300

Marked model

0882300

Pressure connection

G1/4

Setpoint range

25 to 250 bar

Electrical interface

DIN Form A SPDT

Fixed range-end switching differences

11 and 17 bar

Marked Pmax

400 bar