IMI Norgren 101470628 Pneufit 6 mm Tube to R1/4 Swivel Elbow Adaptor

IMI Norgren 101470628 connects 6 mm outside-diameter tubing to a R1/4 male-thread interface. The exact model row identifies this swivel elbow adaptor.

Request a Quote

SKU: 101470628 Category: Tags: , Brand:

Description

The Pneufit catalogue lists the exact 101470628 model in its swivel elbow adaptor dimensional table. The model-specific figures below retain the manufacturer metric values rather than converting the rounded inch figures.

Request a Quote

101470628 Configuration

Model 101470628
Connector form Swivel elbow adaptor
Tube outside diameter 6 mm
Male thread R1/4

Selection Notes

Confirm 6 mm tube outside diameter and the R1/4 receiving connection separately. Match the thread form and sealing method, and check the listed dimensions against the installation space.

Exact 101470628 Configuration and Dimensions

Parameter Catalogue value
Tube outside diameter (mm) 6
Male thread R1/4
C (mm) 20
E (mm) 24.5
K diameter (mm) 12.7
K1 diameter (mm) 15.2
T (mm) 16
AF (mm) 14
AF1 (mm) 9
Weight (g) 28

Pneufit 10 Series Media, Service and Materials

Parameter Catalogue value
Medium Compressed air; consult the manufacturer for other media
Operating pressure Vacuum 750 mmHg to 18 bar, dependent on tubing specification
Operating temperature -20 to +80 degrees C
Tube materials Nylon 11 or 12; polyurethane 95 durometer or above; LDPE
Body and collet Nickel-plated brass
O-ring VMQ-free NBR

Read the Exact Model Row

Use the 101470628 row and its drawing letters when checking the mating interface and mechanical envelope. Adjacent sizes and R/G thread versions have different dimensions.

Tube-Dependent Limits and Assembly

The operating-pressure limit depends on the selected tubing specification. The catalogue requires a square, burr-free tube end and full insertion through the O-ring to the tube stop. Check the complete assembly and the manufacturer instructions before use.

Thread-Engagement Dimension Requires Confirmation

The supplied 101470628 row contains an anomalous G-dimension cell. No G dimension is assigned here; obtain the exact dimensioned drawing from the manufacturer before relying on that thread-engagement figure.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Model

101470628

Connector form

Swivel elbow adaptor

Tube outside diameter

6 mm

Male thread

R1/4