IMI Norgren T70A2800 1/4 NPT Quick Exhaust Valve
The T70A2800 is a 1/4 NPT quick exhaust valve with a 1.9 Cv supply path and a 2.5 Cv exhaust path for local cylinder or reservoir exhaust.
Description
The T70A2800 is a 1/4 NPT quick exhaust valve with a 1.9 Cv supply path and a 2.5 Cv exhaust path for local cylinder or reservoir exhaust.
Selection Notes for T70A2800
Match all three NPT connections and evaluate both fill and exhaust paths; a nominal port size alone does not establish cycle time.
Porting and Flow Performance
| Parameter | Value |
|---|---|
| Supply, outlet and exhaust ports | 1/4 NPT |
| Cv, direction 1 to 2 | 1.9 |
| Cv, direction 2 to 3 | 2.5 |
| Flow test inlet pressure | 6 bar (87 psi) |
| Weight | 4.6 oz |
Operating Conditions and Materials
| Parameter | Value |
|---|---|
| Medium | Filtered compressed air, lubricated or non-lubricated |
| Operating pressure | 0.5 to 10 bar |
| Operating temperature | -20 to 80 degrees C |
| Body and cover | Zinc alloy |
| Seals and O-ring | Nitrile |
Typical Fill and Exhaust Performance
| Parameter | Value |
|---|---|
| Test volume | 150 cc |
| Fill time | 0.023 seconds |
| Fill pressure interval | 0 to 5.5 bar |
| Exhaust time | 0.017 seconds |
| Exhaust pressure interval | 7.0 to 1.4 bar |
Local Exhaust Operation
The T70A2800 provides a short exhaust path for air from a cylinder or reservoir. Supply air flows from port 1 to port 2, while air leaving the actuator is directed from port 2 to exhaust port 3. The higher exhaust-path Cv helps reduce the restriction that would otherwise be imposed by a longer return route.
Flow Ratings and Timing
The supply-to-outlet Cv is 1.9 and the outlet-to-exhaust Cv is 2.5, using a 6 bar inlet test condition. For a 150 cc volume, typical filling takes 0.023 seconds from 0 to 5.5 bar; typical exhaust takes 0.017 seconds from 7.0 to 1.4 bar. Actual system timing also depends on volume, tubing and downstream restrictions.
Pneumatic Service and Body Material
The 1/4 NPT version has a zinc-alloy body and cover with nitrile seals and O-ring. Use filtered air at 0.5 to 10 bar; lubrication is optional. The temperature range is -20 to 80 degrees C, with suitability to be checked before service below 2 degrees C.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Model | T70A2800 |
|---|---|
| Port threads | 1/4 NPT |
| Operating pressure | 0.5 to 10 bar |
| Cv supply to outlet | 1.9 |
| Cv outlet to exhaust | 2.5 |








