Norgren 2636065 26360 G1/4 5/2 Solenoid Valve Body
2636065: G1/4 5/2 indirectly operated valve body with detented manual override, 1-10 bar service range and 1200 l/min flow.
Description
The 2636065 is a soft seal T-spool valve body for controlling double acting pneumatic actuators. The single operator design combines pilot actuation with a detented manual override and accepts a separately selected solenoid system.
Selection Notes for 2636065
Select the solenoid coil, voltage, connector and protection rating for the installation. Maintain at least 1 bar pilot supply pressure and provide unrestricted exhaust paths appropriate to the actuator.
Valve function and performance
| Parameter | Value |
|---|---|
| Function | 5/2 |
| Operation | Indirect solenoid actuated T-spool |
| Port size | G1/4 |
| Operating pressure | 1-10 bar |
| Flow | 1200 l/min |
| Switching time | 35 ms |
| Manual override | With detent |
| Weight without solenoid | 0.55 kg |
Construction and service conditions
| Parameter | Value |
|---|---|
| Medium | Filtered compressed air, lubricated or nonlubricated |
| Housing | Anodized aluminium |
| Pilot flange | POM plastic |
| Seals | NBR |
| Ambient and media temperature | -10 to +60 C, subject to selected solenoid |
| Flow direction | Fixed |
| Mounting | Any orientation; solenoid on top preferred |
Valve installation dimensions
| Parameter | Value |
|---|---|
| G1/4 body width | 55 mm |
| Body depth | 30 mm |
| Mounting hole spacing | 40 mm |
| Standard operator assembly height | 153 mm |
| Supply and exhaust port center spacing | 24 mm |
Pilot operation and manual control
The indirect solenoid operated T-spool requires a 1 to 10 bar supply. Its detented manual override supports local actuation during setup; verify the required valve position before returning control to the electrical system.
Air preparation and mounting
Use filtered compressed air with or without lubrication. The anodized aluminium housing, POM pilot flange and NBR seals suit industrial pneumatic circuits. Mounting orientation is flexible, with the solenoid on top preferred; flow direction is fixed.
Solenoid selection
The solenoid system is selected separately, including voltage, current type and connector. The valve temperature range is -10 to +60 C and must also remain within the chosen solenoid limits. Allow access to the coil retaining nut and mating connector so that the interchangeable operator can be serviced without disturbing the pneumatic pipework.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Model | 2636065 |
|---|---|
| Function | 5/2 |
| Port size | G1/4 |
| Operating pressure | 1-10 bar |
| Manual override | With detent |
| Supply scope | Valve body without solenoid coil |








