Norgren 2636265 26360 G1/4 Bistable 5/2 Valve Body

2636265: G1/4 double operator 5/2 valve body with 1200 l/min flow and a 1-10 bar operating range.

Request a Quote

SKU: 2636265 Category: Tags: , Brand:

Description

The 2636265 uses an indirectly operated soft seal T-spool with an operator at each end for bistable control of double acting pneumatic actuators. Detented manual overrides provide local actuation during commissioning.

Request a Quote

Selection Notes for 2636265

Select two compatible solenoids and the required electrical accessories. Provide space at both ends of the valve for the operators, and check the actuator behavior if control signals or supply pressure are lost.

Valve function and performance

Parameter Value
Function 5/2 bistable
Operation Indirect solenoid / solenoid T-spool
Port size G1/4
Operating pressure 1-10 bar
Flow 1200 l/min
Switching time 30 ms
Manual override With detent
Weight without solenoids 0.9 kg

Construction and service conditions

Parameter Value
Medium Filtered compressed air, lubricated or nonlubricated
Housing Anodized aluminium
Pilot flange POM plastic
Seals NBR
Ambient and media temperature -10 to +60 C, subject to selected solenoid
Flow direction Fixed
Mounting Any orientation; solenoid on top preferred

Standard installation dimensions

Parameter Value
Standard assembly height with operators 224 mm
Body width 55 mm
Body depth 35 mm
Mounting hole spacing 40 mm
Supply and exhaust port center spacing 24 mm

Bistable actuator control

Two solenoid operators shift the 5/2 spool in opposite directions. The minimum supply pressure is 1 bar and maximum pressure is 10 bar. The 1200 l/min flow and 30 ms switching time support double acting actuator circuits; confirm the desired response to loss of electrical and pneumatic supplies during system design.

Air and temperature requirements

The soft seal design uses an anodized aluminium housing, POM pilot flange and NBR seals with filtered compressed air. Lubricated or nonlubricated air can be used. Ambient and media temperatures are -10 to +60 C subject to the selected solenoids; below +2 C the air must be sufficiently dry to prevent ice.

Mounting clearance

The standard arrangement occupies 224 mm from end to end with operators fitted. Provide access to both manual overrides and both coil retainers, and allow connector clearance beyond the valve body. The body is 55 mm wide with 40 mm mounting hole spacing.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Model

2636265

Function

5/2 bistable

Port size

G1/4

Operating pressure

1-10 bar

Manual override

With detent

Supply scope

Valve body without solenoid coils