Norgren 2636047 26360 G1/4 NAMUR 5/2 Valve Body
2636047: NAMUR 5/2 valve body with G1/4 supply and exhaust ports, 1200 l/min flow and detented manual override.
Description
The 2636047 provides direct NAMUR mounting for double acting pneumatic actuators. Its indirectly operated T-spool combines a soft seal arrangement with a single operator and detented manual override.
Selection Notes for 2636047
Match the actuator NAMUR interface and coding pin position, then select the required solenoid, voltage and connector. Keep supply pressure within 1-10 bar and preserve adequate exhaust capacity.
NAMUR valve configuration
| Parameter | Value |
|---|---|
| Function | 5/2 |
| Supply and exhaust ports 1, 3 and 5 | G1/4 |
| Working ports 2 and 4 | NAMUR flange |
| Operating pressure | 1-10 bar |
| Flow | 1200 l/min |
| Switching time | 35 ms |
| Manual override | With detent |
| Weight without solenoid | 0.55 kg |
Construction and service limits
| Parameter | Value |
|---|---|
| Medium | Filtered compressed air, lubricated or nonlubricated |
| Housing | Anodized aluminium |
| Pilot flange | POM plastic |
| Seals | NBR |
| Ambient and media temperature | -20 to +60 C, depending on solenoid system |
| Flow direction | Fixed |
| Mounting | Any; solenoid on top preferred |
NAMUR actuator interface
Supply and exhaust connect through G1/4 ports 1, 3 and 5; working ports 2 and 4 connect through the NAMUR flange. Confirm the interface and actuator port orientation before tightening the mounting screws so that the commanded direction matches the required actuator motion.
Pilot supply and air preparation
The indirect solenoid operated T-spool requires 1 to 10 bar pressure. Use filtered compressed air, with or without lubrication, and keep flow in the assigned direction. At temperatures below +2 C, use air dry enough to avoid ice formation.
Operator and enclosure selection
The solenoid operator can be exchanged to suit the required voltage and electrical protection. The valve body has anodized aluminium housing, a POM pilot flange and NBR seals. Apply the stricter temperature limit of the valve and the chosen solenoid system.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Model | 2636047 |
|---|---|
| Function | 5/2 |
| Interface | NAMUR |
| Port size | G1/4 |
| Operating pressure | 1-10 bar |
| Manual override | With detent |
| Supply scope | Valve body without solenoid coil |








