IMI Norgren R07-200-RNLA 1/4 PTF 0.3 to 8.6 bar Relieving Miniature Pressure Regulator
R07-200-RNLA is a miniature relieving pressure regulator with 1/4 PTF ports and an outlet adjustment range of 0.3 to 8.6 bar.
Description
The R07-200-RNLA combines a zinc body with a push-to-lock pressure-adjusting knob. Its relieving diaphragm permits a lower outlet setting even when the downstream circuit is dead-ended. This configuration is supplied without a pressure gauge.
Selection Notes for R07-200-RNLA
Use 1/4 PTF mating connections and keep the controlled outlet within 0.3 to 8.6 bar. The maximum inlet pressure is 20 bar; the outlet setting range is a separate limit.
Exact pneumatic configuration
| Parameter | Specification |
|---|---|
| Inlet and outlet connection | 1/4 PTF |
| Outlet adjustment range | 0.3 to 8.6 bar |
| Diaphragm | Relieving |
| Pressure gauge | Not included |
| Pressure adjustment | Snap-action knob; push in to lock |
| Medium | Compressed air and neutral gases |
Operating limits and construction
| Parameter | Specification |
|---|---|
| Maximum inlet pressure | 20 bar (300 psig) |
| Operating temperature | -35 to +65 C |
| Cold operation | Air must be sufficiently dry to prevent ice below +2 C |
| Body | Zinc |
| Bonnet, knob and valve seat | Acetal |
| Elastomers | Nitrile |
| Valve | Brass and nitrile |
Panel installation and service
| Parameter | Specification |
|---|---|
| Panel mounting hole diameter | 30 mm |
| Maximum panel thickness | 6 mm |
| Body width reference | 41 mm |
| Knob diameter reference | 28 mm |
| Service kit | 3407-02 |
| Service kit contents | Slip ring, diaphragm, valve seat with O-ring, valve and valve spring |
Pressure adjustment and downstream behavior
The 0.3 to 8.6 bar spring range is intended for the controlled outlet pressure, with inlet pressure limited to 20 bar. Push the snap-action knob inward after adjustment to lock the setting. The relieving diaphragm allows the set pressure to be reduced while the downstream system is dead-ended, releasing excess outlet pressure through the regulator.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Model | R07-200-RNLA |
|---|---|
| Port size | 1/4 |
| Thread | PTF |
| Outlet pressure range | 0.3 to 8.6 bar |
| Regulation | Relieving |
| Gauge | Not included |
| Maximum inlet pressure | 20 bar |
| Medium | Compressed air and neutral gases |







