IMI Norgren 18-015-882 G1/4 Air Pressure Gauge
Norgren 18-015-882 is a G1/4 air pressure gauge from the 5PG series; confirm the dial range from the marking before ordering.
Description
The 18-015-882 is a Norgren 5PG gauge with a G1/4 connection. The supplied folder describes the connection only, so the dial range should be read from the gauge face or the order record rather than assumed from the series.
Key Features
- G1/4 connection as described for this item
- Triple scale dial format used across the 5PG series
- Back or bottom connection options in the series
- Steel, plastic and stainless body options
- RoHS 2 compliant series construction
Technical Data
| Model | 18-015-882 |
|---|---|
| Connection | G1/4 |
| Range | Confirm from gauge dial |
| Scale units | psi, bar, MPa (series) |
| Accuracy | 2% FS mid-range, 3% FS other ranges |
| Body | Steel, plastic or stainless (series) |
Selection Notes
Because the range is not recorded in the supplied folder, this page deliberately avoids stating a scale. Read the dial or the original order document and confirm the range, dial size and connection position before treating any series table as the specification of this gauge.
18-015 5PG series – centre back connection dimensions
| Dial size | A | B | C |
|---|---|---|---|
| 1.5 in (40 mm) | 1.60 in (41 mm) | 0.90 in (23 mm) | 0.47 in (12 mm) |
| 2.0 in (50 mm) | 1.85 in (47 mm) | 1.03 in (26 mm) | 0.55 in (14 mm) |
Connection positions in the series
The series drawings distinguish centre-back and bottom connections and give dimension columns A, B and C for the 40 mm and 50 mm dial sizes. These dimensions help check panel clearance, but they do not identify the range or thread of the 18-015-882, which must be confirmed separately.
Dimensions and mounting
Page 3 gives additional dimension sets for back-connected and bottom-connected gauges, including panel-mount figures. Use the drawing that matches the connection position on the actual gauge; a dimension table cannot confirm which variant was supplied.
Delivery Inspection
Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.
Additional information
| Model | 18-015-882 |
|---|---|
| Connection | G1/4 |
| Range | Confirm from gauge dial |
| Scale units | psi, bar, MPa (series) |
| Accuracy | 2% FS mid-range, 3% FS other ranges |
| Body | Steel, plastic or stainless (series) |







