IMI Norgren 20AG-X4G-PJ100 G1/2 0.7-17 bar High Flow Pressure Regulator

Norgren 20AG-X4G-PJ100 is a G1/2 high-flow pressure regulator covering a 0.7-17 bar outlet range.

Request a Quote

SKU: 20AG-X4G-PJ100 Category: Tags: , Brand:

Description

The 20AG-X4G-PJ100 is a G1/2 high-flow regulator with a 0.7-17 bar outlet range, the higher of the 20AG ranges described in this group. It uses the same ported body layout as the other 20AG sizes, with a T-bar adjustment and a relieving diaphragm.

Request a Quote

Key Features

  • 0.7-17 bar outlet range for higher-pressure circuits
  • G1/2 port as described for this item
  • Balanced valve to limit inlet-pressure effect
  • Relieving diaphragm with T-bar adjustment
  • 1/8 in ISO Rc gauge port

Technical Data

Model 20AG-X4G-PJ100
Port G1/2
Outlet range 0.7-17 bar
Max inlet 28 bar (406 psi)
Gauge port 1/8 in ISO Rc
Adjustment T-bar, relieving diaphragm
Temperature -34 to 80 C (dry air)

Selection Notes

A 0.7-17 bar outlet range leaves less margin below the 28 bar maximum inlet than the low-range versions, so check the actual supply pressure and the regulator’s adjustment margin. The 20AG series information lists 3/4 in and 1 in models; confirm the G1/2 build from the unit.

20AG series – flow reference conditions

Condition Value
Inlet pressure 100 psig (7 bar)
Set pressure 60 psig (4 bar)
Droop 15 psig (1 bar)
Series flow, 3/4 in 160 scfm (80 dm3/s)
Series flow, 1 in 200 scfm (100 dm3/s)

Working margin on a high range

With a 0.7-17 bar outlet range and a 28 bar maximum inlet, the regulator has a defined band in which to work. The series's flow figures assume a 100 psig inlet and a 60 psig set point; at higher outlet settings the available flow and droop will differ, so the circuit should be checked with the actual supply conditions.

Performance curves

The performance page plots outlet pressure against air flow for a 1 in port regulator with a 2.9 to 101.5 psig range. The curves illustrate how outlet pressure falls as flow increases; they are series data and do not replace a test of the exact G1/2 0.7-17 bar regulator.

Replacement Compatibility

Before ordering IMI Norgren 20AG-X4G-PJ100 G1/2 0.7-17 bar High Flow Pressure Regulator as a replacement, compare the complete model code with the part currently installed. Check the connection style, mounting dimensions, electrical rating, and any series-specific suffixes. Parts that look alike may operate differently, so confirm the relevant specifications against the equipment requirements before treating them as interchangeable.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Model

20AG-X4G-PJ100

Port

G1/2

Outlet range

0.7-17 bar

Max inlet

28 bar (406 psi)

Gauge port

1/8 in ISO Rc

Adjustment

T-bar, relieving diaphragm