FESTO CMMP-AS-C2-3A-M0 1622901 Motor Controller

The Festo CMMP-AS-C2-3A-M0 is a single-phase motor controller with a 230 V AC nominal operating voltage and 2.5 A nominal output current. The M0 datasheet lists USB and Ethernet parameterisation interfaces.

SKU: 1622901 Category: Tags: , , Brand:

Description

FESTO CMMP-AS-C2-3A-M0 1622901 Motor Controller

The Festo CMMP-AS-C2-3A-M0 is a single-phase motor controller with a 230 V AC nominal operating voltage and 2.5 A nominal output current. The M0 datasheet lists USB and Ethernet parameterisation interfaces.

Key Features

  • Single-phase 230 V AC nominal operating voltage
  • 2.5 A nominal output current
  • USB and Ethernet parameterisation
  • CANopen and Modbus/TCP fieldbus links listed

Technical Data

Brand FESTO
Model CMMP-AS-C2-3A-M0
Part number 1622901
Type of mounting On sub-base
Screw-clamped
Product weight 2100 g
Display 7-segment display
Storage temperature -25 °C … 70 °C
Ambient temperature 0 °C … 40 °C
Relative air humidity 0 – 90%
Degree of protection IP10
IP20
Phases of nominal operating voltage Single phase
Nominal operating voltage AC 230 V
Permissible voltage fluctuations +/-10%
Input voltage range AC 100 V … 230 V
Mains frequency 50 Hz … 60 Hz
Nominal current 2 A … 3 A
Active PFC Yes
Mains filter Built in
Max. intermediate circuit voltage DC 320 V
Brake resistance 60 Ohm
Pulse power, brake resistance 2.8 kVA
Nominal voltage for logic power supply DC 24 V
Current consumption of logic power supply without clamping brake 0.55 A
Output voltage class AC 3x 0 – 270 V
Nominal output current 2.5 A
Peak current per phase, effective 5 A
Max. peak current duration 5 s
Controller nominal output 500 VA
Maximum output 1000 VA
Parameterisation interface Parameterisation and commissioning
USB
Ethernet
Fieldbus link CANopen
Modbus/TCP
Communication profile DS301/DSP402
Process interfacing I/O coupling
For 256 positioning records
Max. fieldbus transmission rate 1 Mbit/s
Encoder interface output, features Resolution 16384 ppr
Encoder interface output, function Actual value feedback via encoder signals in speed control mode.
Setpoint specification for downstream slave drive.
Encoder interface input, features RS422
SINCOS
Encoder interface input, function Setpoint speed value as encoder signal
Specifies the speed of the slave drive in synchronous mode.
Number of digital logic inputs 10
Number of digital logic outputs 24 V DC 5
Number of analogue setpoint inputs 2
Number of analogue monitor outputs 2
Safety function Safe torque off (STO)
Safe Stop 1 (SS1)
Safety Integrity Level (SIL) Safe torque off (STO)/SIL 3/SILCL 3
Performance Level (PL) Safe Torque Off (STO)/category 4, performance level e

Application Notes

Use this exact model only after confirming the complete part number, electrical supply, installed interfaces and environmental limits against the equipment documentation. Similar series members may have different ratings or communication options.

Selection and Installation

Compare the original nameplate and connection layout with the datasheet for this part number. Follow Festo and machine manufacturer instructions for wiring, mounting and commissioning. Confirm any uncertain option or suffix before energising the equipment.

Inquiry

For a quotation or replacement enquiry, provide model CMMP-AS-C2-3A-M0, part number 1622901, quantity, destination and clear photos of the installed unit where available.

M0 Communication Options

The datasheet for the CMMP-AS-C2-3A-M0 lists USB and Ethernet for parameterisation and CANopen and Modbus/TCP for fieldbus linking. Check the complete M0 model suffix and installed communication wiring.

Documentation Before Ordering

If the original part has an unclear suffix or incomplete marking, gather the available information before placing an order. Photos of the nameplate, the equipment manual, previous purchase records, and connection details can help narrow down the correct version. Keep any specification that remains uncertain open for confirmation instead of assuming a match.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

CMMP-AS-C2-3A-M0

Part Number

1622901

Type of mounting

On sub-base Screw-clamped

Product weight

2100 g

Display

7-segment display

Storage temperature

-25 °C … 70 °C

Ambient temperature

0 °C … 40 °C

Relative air humidity

0 – 90%

Degree of protection

IP10 IP20

Phases of nominal operating voltage

Single phase