FESTO CMMP-AS-C5-3A-M0 1622902 Motor Controller

The Festo CMMP-AS-C5-3A-M0 is a single-phase motor controller with a 230 V AC nominal operating voltage and 5 A nominal output current. Its datasheet lists USB and Ethernet parameterisation interfaces.

SKU: 1622902 Category: Tags: , , Brand:

Description

FESTO CMMP-AS-C5-3A-M0 1622902 Motor Controller

The Festo CMMP-AS-C5-3A-M0 is a single-phase motor controller with a 230 V AC nominal operating voltage and 5 A nominal output current. Its datasheet lists USB and Ethernet parameterisation interfaces.

Key Features

  • Single-phase 230 V AC nominal operating voltage
  • 5 A nominal output current
  • USB and Ethernet parameterisation
  • CANopen and Modbus/TCP fieldbus links listed

Technical Data

Brand FESTO
Model CMMP-AS-C5-3A-M0
Part number 1622902
Type of mounting On sub-base
Screw-clamped
Product weight 2200 g
Display 7-segment display
Storage temperature -25 °C … 70 °C
Ambient temperature 0 °C … 40 °C
Relative air humidity 0 – 90%
Degree of protection IP10
IP20
Phases of nominal operating voltage Single phase
Nominal operating voltage AC 230 V
Permissible voltage fluctuations +/-10%
Input voltage range AC 100 V … 230 V
Mains frequency 50 Hz … 60 Hz
Nominal current 4 A … 6 A
Active PFC Yes
Mains filter Built in
Max. intermediate circuit voltage DC 320 V
Brake resistance 60 Ohm
Pulse power, brake resistance 2.8 kVA
Nominal voltage for logic power supply DC 24 V
Current consumption of logic power supply without clamping brake 0.65 A
Output voltage class AC 3x 0 – 270 V
Nominal output current 5 A
Peak current per phase, effective 10 A
Max. peak current duration 5 s
Controller nominal output 1000 VA
Maximum output 2000 VA
Parameterisation interface Parameterisation and commissioning
USB
Ethernet
Fieldbus link CANopen
Modbus/TCP
Communication profile DS301/DSP402
Process interfacing I/O coupling
For 256 positioning records
Max. fieldbus transmission rate 1 Mbit/s
Encoder interface output, features Resolution 16384 ppr
Encoder interface output, function Actual value feedback via encoder signals in speed control mode.
Setpoint specification for downstream slave drive.
Encoder interface input, features RS422
SINCOS
Encoder interface input, function Setpoint speed value as encoder signal
Specifies the speed of the slave drive in synchronous mode.
Number of digital logic inputs 10
Number of digital logic outputs 24 V DC 5
Number of analogue setpoint inputs 2
Number of analogue monitor outputs 2
Safety function Safe torque off (STO)
Safe Stop 1 (SS1)
Safety Integrity Level (SIL) Safe torque off (STO)/SIL 3/SILCL 3
Performance Level (PL) Safe Torque Off (STO)/category 4, performance level e

Application Notes

Use this exact model only after confirming the complete part number, electrical supply, installed interfaces and environmental limits against the equipment documentation. Similar series members may have different ratings or communication options.

Selection and Installation

Compare the original nameplate and connection layout with the datasheet for this part number. Follow Festo and machine manufacturer instructions for wiring, mounting and commissioning. Confirm any uncertain option or suffix before energising the equipment.

Inquiry

For a quotation or replacement enquiry, provide model CMMP-AS-C5-3A-M0, part number 1622902, quantity, destination and clear photos of the installed unit where available.

M0 Interface Selection

Festo lists USB and Ethernet parameterisation interfaces and CANopen and Modbus/TCP fieldbus links for the CMMP-AS-C5-3A-M0. Verify the controller suffix and communication connection against the installed unit.

Delivery Inspection

Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

CMMP-AS-C5-3A-M0

Part Number

1622902

Type of mounting

On sub-base Screw-clamped

Product weight

2200 g

Display

7-segment display

Storage temperature

-25 °C … 70 °C

Ambient temperature

0 °C … 40 °C

Relative air humidity

0 – 90%

Degree of protection

IP10 IP20

Phases of nominal operating voltage

Single phase