FESTO CMMO-ST-C5-1-DIOP 1512316 Motor Controller
The Festo CMMO-ST-C5-1-DIOP is a motor controller for use as a position controller. Its datasheet specifies 24 V DC load and logic supplies, a 5.7 A nominal output current, and an I/O process interface.
Description
FESTO CMMO-ST-C5-1-DIOP 1512316 Motor Controller
The Festo CMMO-ST-C5-1-DIOP is a motor controller for use as a position controller. Its datasheet specifies 24 V DC load and logic supplies, a 5.7 A nominal output current, and an I/O process interface.
Key Features
- 24 V DC nominal load and logic supply
- 5.7 A nominal output current
- I/O process interface for 32 traversing records
- 11 digital logic inputs and 11 digital logic outputs
Technical Data
| Brand | FESTO |
|---|---|
| Model | CMMO-ST-C5-1-DIOP |
| Part number | 1512316 |
| Mounting type | On sub-base Tightened with top-hat rail |
| Product weight | 290 g |
| Display | Seven-segment display |
| Storage temperature | -25 … 75 °C |
| Ambient temperature | 0 … 50 °C |
| UL ambient temperature | 0 … 40 °C |
| Relative air humidity | 0 – 90 % non-condensing |
| Protection class | IP40 |
| Nominal current, load supply | 6 A |
| Peak current, load supply | 8 A |
| Mains filter | Integrated |
| Nominal voltage, load supply DC | 24 V |
| Max. intermediate circuit voltage, DC | 28 V |
| Braking resistance | 15 Ohm |
| Braking resistance pulse power | 0.1 kVA |
| Nominal DC voltage, logic power supply | 24 V |
| Permissible range, logic voltage | ± 15 % |
| Nominal current, logic supply | 0.3 A |
| Nominal output current | 5.7 A |
| Controller operating mode | PWM-MOSFET power output stage Cascade controller with P position controller PI speed controller Proportional and integral controller for electricity |
| Adjustable current reduction | Using software |
| Step adjustment | Using software |
| Protective function | I²t monitoring Temperature monitoring Current monitoring Voltage failure detection Drag error monitoring Software end-position detection |
| Nominal current adjustment | Using software |
| Parameters configuring interface | Ethernet |
| Ethernet, supported protocols | TCP/IP |
| Process interface | I/O coupling For 32 traversing records |
| Rotor position sensor | Encoder |
| Position sensor | Encoder |
| Encoder interface input, characteristics | RS422 |
| Number of digital logic inputs | 11 |
| Input circuit logic | PNP (positive-switching) |
| Logic input characteristics | galvanically connected to logic potential |
| Specification, logic input | Based on IEC 61131-2 |
| Logic input working range | 24 V |
| Number of 24 V DC digital logic outputs | 11 |
| Switching logic, outputs | PNP (positive-switching) |
| Digital logic output characteristics | Freely configurable to a given extent Not electrically isolated |
| Max. current, digital logic outputs | 100 mA |
| Safety function | Safe torque off (STO) |
| Safety Integrity Level (SIL) | Safe torque off (STO)/SIL 3 |
| Performance level (PL) | Safe torque off (STO)/category 3, Performance Level e |
Application Notes
Use this exact model only after confirming the complete part number, electrical supply, installed interfaces and environmental limits against the equipment documentation. Similar series members may have different ratings or communication options.
Selection and Installation
Compare the original nameplate and connection layout with the datasheet for this part number. Follow Festo and machine manufacturer instructions for wiring, mounting and commissioning. Confirm any uncertain option or suffix before energising the equipment.
Inquiry
For a quotation or replacement enquiry, provide model CMMO-ST-C5-1-DIOP, part number 1512316, quantity, destination and clear photos of the installed unit where available.
I/O Positioning Interface
The CMMO-ST-C5-1-DIOP datasheet lists an I/O process interface for 32 traversing records, with 11 digital logic inputs and 11 24 V DC digital logic outputs. Confirm the installed wiring and control method before replacement.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | CMMO-ST-C5-1-DIOP |
| Part Number | 1512316 |
| Mounting type | On sub-base Tightened with top-hat rail |
| Product weight | 290 g |
| Display | Seven-segment display |
| Storage temperature | -25 … 75 °C |
| Ambient temperature | 0 … 50 °C |
| UL ambient temperature | 0 … 40 °C |
| Relative air humidity | 0 – 90 % non-condensing |
| Protection class | IP40 |









