FESTO CMMS-ST-C8-7-G2 572211 Motor Controller
The Festo CMMS-ST-C8-7-G2 is a motor controller with a 48 V DC nominal load supply and 24 V DC nominal logic supply. Its datasheet lists an 8 A nominal load-supply current and encoder-based position sensing.
Description
FESTO CMMS-ST-C8-7-G2 572211 Motor Controller
The Festo CMMS-ST-C8-7-G2 is a motor controller with a 48 V DC nominal load supply and 24 V DC nominal logic supply. Its datasheet lists an 8 A nominal load-supply current and encoder-based position sensing.
Key Features
- 48 V DC nominal load supply
- 8 A nominal load-supply current
- 24 V DC logic supply
- Safe torque off (STO) listed in the datasheet
Technical Data
| Brand | FESTO |
|---|---|
| Model | CMMS-ST-C8-7-G2 |
| Part number | 572211 |
| Type of mounting | On sub-base Screw-clamped |
| Product weight | 2000 g |
| Display | 7-segment display |
| Operator controls | DIP switch |
| Approval | BIA C-Tick c UL us listed (OL) |
| Storage temperature | -25 °C…70 °C |
| Ambient temperature | 0 °C…50 °C |
| Relative air humidity | 0 – 90% Non-condensing |
| Degree of protection | IP20 |
| Note on materials | RoHS-compliant |
| Nominal current, load supply | 8 A |
| Peak current load power supply | 12 A |
| Mains filter | Integrated |
| Nominal voltage load voltage DC | 48 V |
| Max. intermediate circuit voltage DC | 58 V |
| Brake resistance | 17 Ohm |
| Pulse power, brake resistance | 0.5 kVA |
| Nominal voltage for logic power supply DC | 24 V |
| Permissible range for logic voltage | ± 20 % |
| Nominal current logic power supply | 0.2 A |
| Output voltage class AC | 0 V up to input voltage |
| Max. peak current duration | 2 s |
| Output frequency | 0 Hz…2000 Hz |
| Max. length of motor cable without external mains filter | 25 m |
| Controller operating mode | PWM MOSFET power output stage |
| Operating mode of drive unit | Microschritt, >4000 Schritt/U |
| Adjustable current reduction | Via software |
| Nominal current setting | Via software |
| Max. step frequency | 4 kHz |
| Parameterisation interface | RS232 (9600…115000 bits/s) |
| Fieldbus link | CANopen Profibus DP |
| Bus connection | Plugs 9-pin Sub-D |
| Encoder interface output, function | Setpoint specification for downstream slave drive. |
| Encoder interface input, features | RS422 |
| Encoder interface input, function | Specifies the speed of the slave drive in synchronous mode. |
| Max. current digital logic outputs | 100 mA |
| Number of analogue setpoint inputs | 1 |
| Working range setpoint input | ± 10 V |
| Impedance of setpoint input | 20 kOhm |
| Number of analogue monitor outputs | 1 |
| Working range of monitor outputs | ± 10 V |
| Safety function | Safe torque off (STO) |
| Performance Level (PL) | Safe Torque Off (STO)/category 3, performance level d |
Application Notes
Confirm the complete model code, the installed mechanical or electrical interface and the operating limits against the original equipment. Similar products within a series can differ in pressure, supply, output, mounting or communication.
Selection and Installation
Compare the original nameplate, the part number and the product-specific datasheet. Follow Festo and machine manufacturer instructions for mounting, connections and controlled commissioning. Clarify any uncertain option or suffix before ordering.
Inquiry
For a quotation or replacement enquiry, provide model CMMS-ST-C8-7-G2, part number 572211, quantity, destination and clear photos of the original unit when available.
Stepper Controller Configuration
Festo lists a micro-step operating mode, encoder sensing and a maximum step frequency of 4 kHz for this G2 controller. Match the complete G2 model and settings to the installed motion system.
Application Review
When considering this motor controller for an industrial application, review the operating conditions of the equipment rather than relying on the product name alone. Confirm the required connections, available space, duty pattern, and surrounding environment. The final selection should follow the complete product specification and the machine manufacturer's requirements.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | CMMS-ST-C8-7-G2 |
| Part Number | 572211 |
| Type of mounting | On sub-base Screw-clamped |
| Product weight | 2000 g |
| Display | 7-segment display |
| Operator controls | DIP switch |
| Approval | BIA C-Tick c UL us listed (OL) |
| Storage temperature | -25 °C…70 °C |
| Ambient temperature | 0 °C…50 °C |
| Relative air humidity | 0 – 90% Non-condensing |









