FESTO CMMT-AS-C3-11A-P3-MP-S1 8143166 Servo Drive

The Festo CMMT-AS-C3-11A-P3-MP-S1 is a servo drive with a three-phase 400 V AC nominal supply. The datasheet lists 2.5 A effective nominal current per phase and a 24 V DC logic supply.

SKU: 8143166 Category: Tags: , , Brand:

Description

FESTO CMMT-AS-C3-11A-P3-MP-S1 8143166 Servo Drive

The Festo CMMT-AS-C3-11A-P3-MP-S1 is a servo drive with a three-phase 400 V AC nominal supply. The datasheet lists 2.5 A effective nominal current per phase and a 24 V DC logic supply.

Key Features

  • Three-phase 400 V AC nominal supply
  • 2.5 A effective nominal current per phase
  • 24 V DC logic supply
  • Multi-protocol fieldbus information in the datasheet

Technical Data

Brand FESTO
Model CMMT-AS-C3-11A-P3-MP-S1
Part number 8143166
Type of mounting Mounting plate, attached with screws
Mounting position Open convection
Vertical
Product weight 2100 g
Display Green/yellow/red LED
Storage temperature -25 °C … 55 °C
Ambient temperature 0 °C … 50 °C
Note on ambient temperature Power must be reduced by 3% per °C at ambient temperatures above
40°C.
UL ambient temperature 0 °C … 50 °C
Relative air humidity 5 – 90%
Non-condensing
Degree of protection IP20
Phases of nominal operating voltage 3 Phase ~
Nominal operating voltage AC 400 V
Input voltage range AC 200 V … 480 V
Nominal current, load supply 3 A
Peak current load power supply 9 A
Nominal voltage load voltage DC 560 V
Nominal voltage for logic power supply DC 24 V
Current consumption of logic power supply without clamping brake 0.5 A
Max. current consumption, logic power supply with clamping brake and I/O 2 A
Output voltage class AC 3x (0 – input) V
Nominal current per phase, effective 2.5 A
Peak current per phase, effective 7.5 A
Max. peak current duration 2 s
Controller nominal output 1200 VA
Maximum output 3600 VA
Number of inputs for motor temperature sensor 1
Ethernet interface, function Parameterisation and commissioning
Ethernet interface, protocol TCP/IP
Field bus, protocol EtherCAT®
EtherNet/IP
Modbus/TCP
PROFINET IRT
PROFINET RT
Fieldbus interface, function Bus connection incoming/outgoing
EtherCAT® slave
PROFINET slave
EtherNet/IP slave
Fieldbus link EtherCAT®
EtherNet/IP
Modbus/TCP
PROFINET
Communication profile CiA402
CoE (CANopen over EtherCAT)
EoE (Ethernet over EtherCAT)
FoE (File over EtherCAT)
PROFIdrive
DriveProfile
Process interfacing AC1: Adjustable-speed drives
AC3: Drives with positioning function
AC4: Synchronous servo application
Adjustable-speed drives
Drives with positioning function
I/O mode for 256 positioning records
Interpolated mode CSP
Interpolated mode CST
Interpolated mode CSV
Field bus interface, transmission rate 100 Mbit/s
Field bus, connection type 2x socket
Field bus, connection system RJ45
Encoder interface, function BiSS-C
EnDat® 2.1 encoder
EnDat® 2.2-sensor
Hiperface encoder
Incremental encoder
Nikon
SIN/COS encoder
Encoder interface 2, function Incremental encoder
SIN/COS encoder
Encoder interface output, features 1 MHz maximum output frequency
max. 16384 ppr
Encoder interface input, features 1 MHz maximum output frequency
max. 16384 ppr
Number of digital logic inputs 12
Number of high-speed logic inputs 2
Number of digital logic outputs 24 V DC 6
Number of high-speed switching outputs 2
Number of floating switching outputs 1
Number of analogue setpoint inputs 1
Safety function Safe brake control (SBC)
Safe torque off (STO)
Safe Stop 1 (SS1)
Performance Level (PL) Safe brake control (SBC)/category 3, performance level e
Safe Torque Off (STO)/category 4, performance level e
Number of safe 2-pin inputs 2
Number of diagnostic outputs 2

Application Notes

Confirm the complete model code, the installed mechanical or electrical interface and the operating limits against the original equipment. Similar products within a series can differ in pressure, supply, output, mounting or communication.

Selection and Installation

Compare the original nameplate, the part number and the product-specific datasheet. Follow Festo and machine manufacturer instructions for mounting, connections and controlled commissioning. Clarify any uncertain option or suffix before ordering.

Inquiry

For a quotation or replacement enquiry, provide model CMMT-AS-C3-11A-P3-MP-S1, part number 8143166, quantity, destination and clear photos of the original unit when available.

Three-Phase Supply

The C3-11A-P3-MP-S1 datasheet identifies a three-phase 400 V AC nominal operating voltage and 24 V DC nominal logic supply. Verify the mains phases, logic wiring and motor rating before commissioning.

Spare Parts Records

Keeping a clear record of installed components can make future maintenance and purchasing more efficient. For this product, record the brand, full model code, important specifications, and equipment location. Update the record whenever a component or machine configuration changes, so the next replacement decision is based on current information.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

CMMT-AS-C3-11A-P3-MP-S1

Part Number

8143166

Type of mounting

Mounting plate, attached with screws

Mounting position

Open convection Vertical

Product weight

2100 g

Display

Green/yellow/red LED

Storage temperature

-25 °C … 55 °C

Ambient temperature

0 °C … 50 °C

Note on ambient temperature

Power must be reduced by 3% per °C at ambient temperatures above 40°C.

UL ambient temperature

0 °C … 50 °C