FESTO CMMT-AS-C4-3A-EP-S1 5340825 Servo Drive
The Festo CMMT-AS-C4-3A-EP-S1 is a servo drive with a single-phase 230 V AC nominal supply. Its datasheet lists 4 A effective nominal current per phase, 700 W nominal controller power and a 24 V DC logic supply.
Description
FESTO CMMT-AS-C4-3A-EP-S1 5340825 Servo Drive
The Festo CMMT-AS-C4-3A-EP-S1 is a servo drive with a single-phase 230 V AC nominal supply. Its datasheet lists 4 A effective nominal current per phase, 700 W nominal controller power and a 24 V DC logic supply.
Key Features
- Single-phase 230 V AC nominal supply
- 4 A effective nominal current per phase
- 700 W nominal controller power
- 24 V DC nominal logic supply
Technical Data
| Brand | FESTO |
|---|---|
| Model | CMMT-AS-C4-3A-EP-S1 |
| Part number | 5340825 |
| Mounting type | Mounting plate, bolted |
| Product weight | 1,400 g |
| Display | LED green/yellow/red |
| Storage temperature | -25 … 55 °C |
| Ambient temperature | 0 … 50 °C |
| Note on ambient temperature | Power must be reduced by 3%/°C at ambient temperatures above 40°C. |
| UL ambient temperature | 0 … 40 °C |
| Relative air humidity | 5 – 90 % non-condensing |
| Protection class | IP20 |
| Overvoltage category | III |
| Nominal operating voltage, phases | Single-phase |
| Nominal operating voltage, AC | 230 V |
| Permissible voltage fluctuation | -20 % / +15 % |
| Input voltage range AC | 100 … 230 V |
| Line frequency | 48 … 62 Hz |
| Nominal current, load supply | 5.6 A |
| Peak current, load supply | 16.8 A |
| Nominal voltage, load supply DC | 320 V |
| Permissible range, load supply | -20 %/+15 % |
| Nominal DC voltage, logic power supply | 24 V |
| Current consumption, logic power supply without clamping brake | 0.5 A |
| Output voltage range AC | 3x (0 – Input) V |
| Effective nominal current per phase | 4 A |
| Effective peak current per phase | 12 A |
| Max. peak current duration | 2 s |
| Nominal controller power | 700 W |
| Number of inputs for motor temperature sensor | 1 |
| Ethernet interface, function | Parameterisation and commissioning |
| Ethernet interface, protocol | TCP/IP |
| Fieldbus interface, protocol | EtherNet/IP Modbus/TCP |
| Fieldbus coupling | EtherNet/IP Modbus/TCP |
| Communications profile | DriveProfile |
| Process interface | Adjustable speed drives Drives with positioning function |
| Fieldbus interface, transmission rate | 100 Mbit/s |
| Fieldbus interface, type of connection | 2x socket |
| Fieldbus interface, connection technology | RJ45 |
| Encoder interface, function | ENDAT 2.1 encoder ENDAT 2.2 encoder Hiperface encoder Incremental encoder Nikon SIN/COS encoder |
| Encoder interface 2, function | Incremental encoder SIN/COS encoder |
| Encoder interface output, characteristics | 1 MHz maximum output frequency max. 16384 ppr |
| Encoder interface input, characteristics | 1 MHz maximum output frequency max. 16384 ppr |
| Number of digital logic inputs | 12 |
| Number of high-speed logic inputs | 2 |
| Number of 24 V DC digital logic outputs | 6 |
| Number of high-speed switching outputs | 2 |
| Number of floating switching outputs | 1 |
| Number of analogue setpoint inputs | 1 |
| Safety function | Safe brake control (SBC) Safe torque off (STO) Safe stop 1 (SS1) |
| Performance level (PL) | Safe brake control (SBC) / category 3, Performance Level e Safe Torque off (STO)/Category 4, Performance Level e |
| Number of safe 2-pin inputs | 2 |
| Number of diagnostic outputs | 2 |
Application Notes
Confirm the complete model code, the installed mechanical or electrical interface and the operating limits against the original equipment. Similar products within a series can differ in pressure, supply, output, mounting or communication.
Selection and Installation
Compare the original nameplate, the part number and the product-specific datasheet. Follow Festo and machine manufacturer instructions for mounting, connections and controlled commissioning. Clarify any uncertain option or suffix before ordering.
Inquiry
For a quotation or replacement enquiry, provide model CMMT-AS-C4-3A-EP-S1, part number 5340825, quantity, destination and clear photos of the original unit when available.
Output and Logic Supply
The C4-3A-EP-S1 datasheet specifies 4 A effective nominal current per phase and a separate 24 V DC logic supply. Compare these values with the original drive and motor before replacement.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | CMMT-AS-C4-3A-EP-S1 |
| Part Number | 5340825 |
| Mounting type | Mounting plate, bolted |
| Product weight | 1,400 g |
| Display | LED green/yellow/red |
| Storage temperature | -25 … 55 °C |
| Ambient temperature | 0 … 50 °C |
| Note on ambient temperature | Power must be reduced by 3%/°C at ambient temperatures above 40°C. |
| UL ambient temperature | 0 … 40 °C |
| Relative air humidity | 5 – 90 % non-condensing |









