FESTO CMMS-ST-C8-7 547454 Motor Controller

The Festo CMMS-ST-C8-7 is a motor controller for a stepper motor. The datasheet lists a 48 V DC nominal load supply, 8 A nominal load-supply current and a separate 24 V DC logic supply.

SKU: 547454 Category: Tags: , , Brand:

Description

FESTO CMMS-ST-C8-7 547454 Motor Controller

The Festo CMMS-ST-C8-7 is a motor controller for a stepper motor. The datasheet lists a 48 V DC nominal load supply, 8 A nominal load-supply current and a separate 24 V DC logic supply.

Key Features

  • 48 V DC nominal load supply
  • 8 A nominal load-supply current
  • 24 V DC logic supply
  • Micro-step operating mode with encoder sensing

Technical Data

Brand FESTO
Model CMMS-ST-C8-7
Part number 547454
Controller operating mode PWM-MOSFET power output stage
Operating mode Micro step, >4000 step/U
Adjustable current reduction Using software
Position sensor Encoder
Mains filter Integrated
Step adjustment Using software
Protective function I²t monitoring
Temperature monitoring
Current monitoring
Voltage failure detection
Drag error monitoring
Rotor position sensor Encoder
Display Seven-segment display
Control elements DIP switch
Nominal current adjustment Using software
Max. step frequency 4 kHz
Braking resistance 17 Ohm
Bus terminating resistor Integrated
Digital logic output characteristics Freely configurable to a given extent
Not electrically isolated
Setpoint input impedance 20 kOhm
Braking resistance pulse power 0.5 kVA
Max. current, digital logic outputs 100 mA
Max. peak current duration 2 s
Max. intermediate circuit voltage, DC 48 V
Nominal DC voltage, logic power supply 24 V
Nominal voltage, load supply DC 48 V
Nominal current, load supply 8 A
Nominal current, logic supply 0.3 A
Parameters configuring interface RS232 (9600…115000 Bits/s)
Peak current, load supply 12 A
Permissible range, logic voltage ± 20 %
Storage temperature -25 … 70 °C
Relative air humidity 0 – 90 %
non-condensing
Protection class IP20
Ambient temperature 0 … 50 °C
Product weight 2,000 g
Number of analogue monitor outputs 1
Number of analogue setpoint inputs 1
Monitor output working range ± 10 V
Setpoint input working range ± 10 V
Encoder interface input, characteristics RS422
Encoder interface output, function Setpoint specification for downstream slave drive unit
Encoder interface input, function In synchronous operation as specified speed in RPM for the slave drive unit
Bus connection CAN interface
D-Sub
9-pin
Fieldbus coupling CANopen
Profibus DP
Mounting type Tightened
On sub-base

Application Notes

Confirm the complete model code, the installed mechanical or electrical interface and the operating limits against the original equipment. Similar products within a series can differ in pressure, supply, output, mounting or communication.

Selection and Installation

Compare the original nameplate, the part number and the product-specific datasheet. Follow Festo and machine manufacturer instructions for mounting, connections and controlled commissioning. Clarify any uncertain option or suffix before ordering.

Inquiry

For a quotation or replacement enquiry, provide model CMMS-ST-C8-7, part number 547454, quantity, destination and clear photos of the original unit when available.

Separate Load and Logic Supplies

The CMMS-ST-C8-7 datasheet lists a 48 V DC nominal load supply and a separate 24 V DC nominal logic supply. Confirm both circuits and the installed stepper-motor wiring before replacement.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

Order Detail Confirmation

To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.

Additional information

Brand

FESTO

Model

CMMS-ST-C8-7

Part Number

547454

Controller operating mode

PWM-MOSFET power output stage

Operating mode

Micro step, >4000 step/U

Adjustable current reduction

Using software

Position sensor

Encoder

Mains filter

Integrated

Step adjustment

Using software

Protective function

I²t monitoring Temperature monitoring Current monitoring Voltage failure detection Drag error monitoring

Rotor position sensor

Encoder