FESTO JMEBH-5/2-D-1-ZSR-C 184495 Solenoid Valve
The Festo JMEBH-5/2-D-1-ZSR-C (part number 184495) is a solenoid valve. Its product datasheet lists valve function as 5/2 bistable and standard nominal flow rate as 1,200 l/min.
Description
FESTO JMEBH-5/2-D-1-ZSR-C 184495 Solenoid Valve
The Festo JMEBH-5/2-D-1-ZSR-C (part number 184495) is a solenoid valve. Its product datasheet lists valve function as 5/2 bistable and standard nominal flow rate as 1,200 l/min.
Key Features
- Valve function: 5/2 bistable
- Standard nominal flow rate: 1,200 l/min
- Operating pressure: 2 … 10 bar
- Pneumatic connection, port 1: Connection plate size 1 as per ISO 5599-1
Technical Data
| Brand | FESTO |
|---|---|
| Model | JMEBH-5/2-D-1-ZSR-C |
| Part number | 184495 |
| Valve function | 5/2 bistable |
| Type of actuation | electrical |
| Width | 42 mm |
| Standard nominal flow rate | 1,200 l/min |
| Operating pressure | 2 … 10 bar |
| Design structure | Piston slide |
| Protection class | IP65 |
| Nominal size | 8 mm |
| Grid dimension | 43 mm |
| Exhaust-air function | throttleable |
| Sealing principle | soft |
| Assembly position | Any |
| Conforms to standard | ISO 5599-1 |
| Manual override | Pushing |
| ISO code | 155 |
| Type of piloting | Piloted |
| Pilot air supply | Internal |
| Flow direction | non reversible |
| Freedom from overlap | Yes |
| Note on forced dynamisation | Switching frequency at least once a week |
| Operating status display | Yellow LED |
| Switching time reversal | 12 ms |
| Duty cycle | 100% |
| Max. positive test pulse with logic 0 | 2,600 µs |
| Max. negative test pulse with logic 1 | 1,200 µs |
| Characteristic coil data | 24 V DC: 2.5 W |
| Permissible voltage fluctuation | +/- 10 % |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (subsequently required for further operation) |
| Vibration resistance | Transport application test at severity level 1 in accordance with FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 in accordance with FN 942017-5 and EN 60068-2-27 |
| Medium temperature | -5 … 50 °C |
| Ambient temperature | -5 … 50 °C |
| Product weight | 600 g |
| Electrical connection | Central plug Round design M12x1 |
| Mounting type | On sub-base With through-hole and screw |
| Pilot exhaust port 82 | Non-ducted |
| Pilot exhaust port 84 | Non-ducted |
| Pneumatic connection, port 1 | Connection plate size 1 as per ISO 5599-1 |
| Pneumatic connection, port 2 | Connection plate size 1 as per ISO 5599-1 |
| Pneumatic connection, port 3 | Connection plate size 1 as per ISO 5599-1 |
| Pneumatic connection, port 4 | Connection plate size 1 as per ISO 5599-1 |
| Pneumatic connection, port 5 | Connection plate size 1 as per ISO 5599-1 |
| Materials information for seals | HNBR NBR |
| Materials information, housing | Aluminium die cast |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model JMEBH-5/2-D-1-ZSR-C, part number 184495, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists operating pressure as 2 … 10 bar for part number 184495. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | JMEBH-5/2-D-1-ZSR-C |
| Part Number | 184495 |
| Valve function | 5/2 bistable |
| Type of actuation | electrical |
| Width | 42 mm |
| Standard nominal flow rate | 1,200 l/min |
| Operating pressure | 2 … 10 bar |
| Design structure | Piston slide |
| Protection class | IP65 |
| Nominal size | 8 mm |









