FESTO MHA1-2X2/2G-1,5-3-3-3 562051 Vacuum Valve
The Festo MHA1-2X2/2G-1,5-3-3-3 (part number 562051) is a vacuum valve. Its product datasheet lists valve function as 2×2/2 closed monostable and standard nominal flow rate (standardised to din 1343) as 30 l/min.
Description
FESTO MHA1-2X2/2G-1,5-3-3-3 562051 Vacuum Valve
The Festo MHA1-2X2/2G-1,5-3-3-3 (part number 562051) is a vacuum valve. Its product datasheet lists valve function as 2×2/2 closed monostable and standard nominal flow rate (standardised to din 1343) as 30 l/min.
Key Features
- Valve function: 2×2/2 closed monostable
- Standard nominal flow rate (standardised to DIN 1343): 30 l/min
- pneumatic working port: QS-3
- Operating voltage: 24 V DC
Technical Data
| Brand | FESTO |
|---|---|
| Model | MHA1-2X2/2G-1,5-3-3-3 |
| Part number | 562051 |
| Valve function | 2×2/2 closed monostable |
| Type of actuation | Electrical |
| Construction width | 20 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 30 l/min |
| pneumatic working port | QS-3 |
| Operating voltage | 24 V DC |
| Operating pressure | 0 bar … 1.5 bar |
| Type of reset | Mechanical spring |
| Degree of protection | IP40 |
| Nominal size | 1.5 mm |
| Grid dimension | 20 mm |
| Exhaust-air function | Cannot be throttled |
| Sealing principle | Soft |
| Mounting position | Any |
| Manual override | Non-detenting |
| Type of piloting | Direct |
| Flow direction | Non-reversible |
| lap | Underlap |
| Signal status display | LED |
| Operating pressure, reversible | -0.95 bar … 0 bar |
| Suitability for vacuum | Yes |
| Standard flow rate (standardised to DIN 1343) | 30 l/min |
| Max. switching frequency | 10 Hz |
| Switching time off | 6 ms |
| Switching time on | 6 ms |
| Duty cycle | 100% |
| Characteristic coil data | 24 V DC: low-current phase 0.7 W, high-current phase 3.0 W |
| Permissible voltage fluctuations | +/-10% |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Storage temperature | -20 °C … 60 °C |
| Media temperature | -5 °C … 50 °C |
| Ambient temperature | -5 °C … 50 °C |
| Product weight | 30.6 g |
| Max. cable length | 30 M |
| Electrical connection | Plug KMH |
| Type of mounting | With through-hole |
| Pneumatic connection, port 1 | QS-3 |
| Pneumatic connection, port 11 | QS-3 |
| Pneumatic connection, port 2 | QS-3 |
| Note on materials | RoHS compliant |
| Material seals | Fluoro rubber HNBR NBR |
| Material housing | Reinforced PPS |
| Material screws | Steel |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model MHA1-2X2/2G-1,5-3-3-3, part number 562051, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists pneumatic working port as QS-3 for part number 562051. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | MHA1-2X2/2G-1,5-3-3-3 |
| Part Number | 562051 |
| Valve function | 2×2/2 closed monostable |
| Type of actuation | Electrical |
| Construction width | 20 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 30 l/min |
| pneumatic working port | QS-3 |
| Operating voltage | 24 V DC |
| Operating pressure | 0 bar … 1.5 bar |
| Type of reset | Mechanical spring |









