FESTO MHP1-M1H-3/2G-M3-TC 197014 Solenoid Valve
The Festo MHP1-M1H-3/2G-M3-TC (part number 197014) is a solenoid valve. Its product datasheet lists valve function as 3/2-way, single solenoid, closed and standard nominal flow rate (standardised to din 1343) as 10 l/min.
Description
FESTO MHP1-M1H-3/2G-M3-TC 197014 Solenoid Valve
The Festo MHP1-M1H-3/2G-M3-TC (part number 197014) is a solenoid valve. Its product datasheet lists valve function as 3/2-way, single solenoid, closed and standard nominal flow rate (standardised to din 1343) as 10 l/min.
Key Features
- Valve function: 3/2-way, single solenoid, closed
- Standard nominal flow rate (standardised to DIN 1343): 10 l/min
- pneumatic working port: M3
- Operating voltage: 24 V DC
Technical Data
| Brand | FESTO |
|---|---|
| Model | MHP1-M1H-3/2G-M3-TC |
| Part number | 197014 |
| Valve function | 3/2-way, single solenoid, closed |
| Type of actuation | Electrical |
| Construction width | 10 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 10 l/min |
| pneumatic working port | M3 |
| Operating voltage | 24 V DC |
| Operating pressure | 0 MPa … 0.8 MPa |
| Operating pressure | 0 bar … 8 bar |
| Operating pressure | 0 psi … 116 psi |
| Design | Poppet valve with spring return |
| Type of reset | Mechanical spring |
| Degree of protection | IP40 |
| Nominal size | 0.65 mm |
| Grid dimension | 10 mm |
| Exhaust-air function | Can be throttled |
| Sealing principle | Soft |
| Mounting position | Any |
| Manual override | Non-detenting |
| Type of piloting | Direct |
| Flow direction | Non-reversible |
| Valve position code | Label |
| lap | Underlap |
| Note on forced dynamization | Switching frequency min. 1/week |
| Max. switching frequency | 20 Hz |
| Switching time off | 4 ms |
| Switching time on | 4 ms |
| Duty cycle | 100% |
| Electrical power consumption | 1 W |
| Max. positive test pulse with 0 signal | 500 µs |
| Max. negative test pulse with 1 signal | 400 µs |
| Characteristic coil data | 24 V DC: 1.0 W |
| Permissible voltage fluctuations | +/-10% |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Storage temperature | -20 °C … 60 °C |
| Media temperature | -5 °C … 40 °C |
| Ambient temperature | -5 °C … 40 °C |
| Product weight | 10 g |
| Electrical connection | Plug |
| Type of mounting | On sub-base With through-hole |
| Pneumatic connection, port 1 | Sub-base |
| Pneumatic connection, port 2 | M3 |
| Pneumatic connection, port 3 | Sub-base |
| Note on materials | RoHS compliant |
| Material seals | Fluoro rubber HNBR NBR |
| Material housing | Reinforced PPS |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model MHP1-M1H-3/2G-M3-TC, part number 197014, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists pneumatic working port as M3 for part number 197014. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Functional Check After Replacement
After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | MHP1-M1H-3/2G-M3-TC |
| Part Number | 197014 |
| Valve function | 3/2-way, single solenoid, closed |
| Type of actuation | Electrical |
| Construction width | 10 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 10 l/min |
| pneumatic working port | M3 |
| Operating voltage | 24 V DC |
| Operating pressure | 0 bar … 8 bar |









