FESTO MHP2-M1H-3/2O-M5 196142 Solenoid Valve
The Festo MHP2-M1H-3/2O-M5 (part number 196142) is a solenoid valve. Its product datasheet lists valve function as 3/2-way, single solenoid, open and standard nominal flow rate (standardised to din 1343) as 100 l/min.
Description
FESTO MHP2-M1H-3/2O-M5 196142 Solenoid Valve
The Festo MHP2-M1H-3/2O-M5 (part number 196142) is a solenoid valve. Its product datasheet lists valve function as 3/2-way, single solenoid, open and standard nominal flow rate (standardised to din 1343) as 100 l/min.
Key Features
- Valve function: 3/2-way, single solenoid, open
- Standard nominal flow rate (standardised to DIN 1343): 100 l/min
- pneumatic working port: M5
- Operating voltage: 24 V DC
Technical Data
| Brand | FESTO |
|---|---|
| Model | MHP2-M1H-3/2O-M5 |
| Part number | 196142 |
| Valve function | 3/2-way, single solenoid, open |
| Type of actuation | Electrical |
| Construction width | 10 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 100 l/min |
| pneumatic working port | M5 |
| Operating voltage | 24 V DC |
| Operating pressure | -0.09 MPa … 0.8 MPa |
| Operating pressure | -0.9 bar … 8 bar |
| Operating pressure | -13.05 psi … 116 psi |
| Design | Pressure relief poppet valve |
| Type of reset | Mechanical spring |
| Degree of protection | IP65 |
| Nominal size | 2 mm |
| Grid dimension | 14 mm |
| Note on grid dimension | Minimum distance between the valves is 4 mm |
| Exhaust-air function | Can be throttled |
| Sealing principle | Soft |
| Mounting position | Any |
| Manual override | Non-detenting |
| Type of piloting | Direct |
| Flow direction | Reversible with restrictions |
| lap | Underlap |
| Operating pressure, reversible | -0.09 MPa … 0.1 MPa |
| Operating pressure, reversible | -0.9 bar … 1 bar |
| Operating pressure, reversible | -13.05 psi … 14.5 psi |
| Max. switching frequency | 130 Hz |
| Switching time off | 3.5 ms |
| Switching time on | 7 ms |
| Duty cycle | 100% |
| Characteristic coil data | 24 V DC: 2.88 W |
| Permissible voltage fluctuations | +/-10% |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 6 according to ISO 14644-1 |
| Media temperature | -5 °C … 40 °C |
| Ambient temperature | -5 °C … 40 °C |
| Product weight | 60 g |
| Electrical connection | 2-pin Plug |
| Type of mounting | On PR rail |
| Pneumatic connection, port 11 | Sub-base |
| Pneumatic connection, port 2 | M5 |
| Note on materials | RoHS compliant |
| Material seals | HNBR NBR |
| Material housing | Die-cast zinc, coated |
| Material screws | Galvanised steel |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model MHP2-M1H-3/2O-M5, part number 196142, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists pneumatic working port as M5 for part number 196142. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Delivery Inspection
Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | MHP2-M1H-3/2O-M5 |
| Part Number | 196142 |
| Valve function | 3/2-way, single solenoid, open |
| Type of actuation | Electrical |
| Construction width | 10 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 100 l/min |
| pneumatic working port | M5 |
| Operating voltage | 24 V DC |
| Operating pressure | -0.9 bar … 8 bar |







