FESTO VEAB-L-26-D2-Q4-V1-1R1 8046305 Proportional-Pressure Regulator

The Festo VEAB-L-26-D2-Q4-V1-1R1 (part number 8046305) is a proportional-pressure regulator. Its product datasheet lists valve function as 3-way proportional pressure regulator and pneumatic connection, port 1 as QS-4.

SKU: 8046305 Category: Tags: , , Brand:

Description

FESTO VEAB-L-26-D2-Q4-V1-1R1 8046305 Proportional-Pressure Regulator

The Festo VEAB-L-26-D2-Q4-V1-1R1 (part number 8046305) is a proportional-pressure regulator. Its product datasheet lists valve function as 3-way proportional pressure regulator and pneumatic connection, port 1 as QS-4.

Key Features

  • Valve function: 3-way proportional pressure regulator
  • Pneumatic connection, port 1: QS-4
  • Pneumatic connection, port 2: QS-4
  • Pneumatic connection, port 3: QS-4

Technical Data

Brand FESTO
Model VEAB-L-26-D2-Q4-V1-1R1
Part number 8046305
Valve function 3-way proportional pressure regulator
Type of piloting Direct
Type of reset Mechanical spring
Type of actuation Electrical
Mounting position Any
Sealing principle Soft
Total leakage 1 l/h
Ambient temperature 0 °C … 50 °C
Media temperature 5 °C … 50 °C
Storage temperature -20 °C … 70 °C
Dimensions (W x L x H) 18 mm x 60.5 mm x 85 mm
Pneumatic connection, port 1 QS-4
Pneumatic connection, port 2 QS-4
Pneumatic connection, port 3 QS-4
Material seals NBR
Type of mounting With through-hole
With accessories
Inlet pressure 1 0 MPa … 0.4 MPa
Inlet pressure 1 0 bar … 4 bar
Inlet pressure 1 0 psi … 58 psi
Output pressure 2 0.001 MPa … 0.2 MPa
Output pressure 2 0.01 bar … 2 bar
Output pressure 2 0.145 psi … 29 psi
Standard nominal flow rate (standardised to DIN 1343) ≥20 l/min
Standard nominal flow rate 2-3 ≥20 l/min
Linearity 0.5 %FS
Reproducibility 0.4 %FS
Hysteresis 0.25 %FS
Temperature cooefficient 0.05 %/K
Total accuracy 0.75 %FS
Product weight 70 g
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Inert gas
Note on operating and pilot medium Lubricated operation not possible
Degree of protection IP65
KC mark KC-EMV
Note on materials RoHS compliant
Corrosion resistance class CRC 2 – Moderate corrosion stress
Operational voltage range DC 19 V … 29 V
Nominal operating voltage DC 24 V
Residual ripple 10%
Setpoint value 0 – 10 V
Signal range analogue output 0 – 10 V
Accuracy analogue output in ± %FS 2 %FS
Max. electrical power consumption 1 W
Reverse polarity protection For all electrical connections
Short circuit current rating For all electrical connections
Safety instructions Safety position VEAA/VEAB: if the electrical power supply fails, the
output pressure is maintained unregulated and may rise or fall – valve
blocked.
Electrical connection M8x1
Plug
To EN 60947-5-2
Material housing Reinforced PA

Application Notes

Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.

Selection and Installation

Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.

Inquiry

For a quotation or replacement enquiry, provide model VEAB-L-26-D2-Q4-V1-1R1, part number 8046305, quantity, destination and clear photos of the original unit when available.

Datasheet Selection Note

Festo lists pneumatic connection, port 2 as QS-4 for part number 8046305. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

Order Detail Confirmation

To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.

Additional information

Brand

FESTO

Model

VEAB-L-26-D2-Q4-V1-1R1

Part Number

8046305

Valve function

3-way proportional pressure regulator

Type of piloting

Direct

Type of reset

Mechanical spring

Type of actuation

Electrical

Mounting position

Any

Sealing principle

Soft

Total leakage

1 l/h

Ambient temperature

0 °C … 50 °C