FESTO VOVC-BT-T32C-MT-F-1T1 565450 Solenoid Valve
The Festo VOVC-BT-T32C-MT-F-1T1 (part number 565450) is a solenoid valve. Its product datasheet lists valve function as 2×3/2 closed monostable and pneumatic working port as Sub-base.
Description
FESTO VOVC-BT-T32C-MT-F-1T1 565450 Solenoid Valve
The Festo VOVC-BT-T32C-MT-F-1T1 (part number 565450) is a solenoid valve. Its product datasheet lists valve function as 2×3/2 closed monostable and pneumatic working port as Sub-base.
Key Features
- Valve function: 2×3/2 closed monostable
- pneumatic working port: Sub-base
- Operating voltage: 24 V DC
- Operating pressure: 0 MPa … 0.8 MPa
Technical Data
| Brand | FESTO |
|---|---|
| Model | VOVC-BT-T32C-MT-F-1T1 |
| Part number | 565450 |
| Valve function | 2×3/2 closed monostable |
| Type of actuation | Electrical |
| Valve size | 10 mm |
| pneumatic working port | Sub-base |
| Operating voltage | 24 V DC |
| Operating pressure | 0 MPa … 0.8 MPa |
| Operating pressure | 0 bar … 8 bar |
| Operating pressure | 0 psi … 116 psi |
| Design | Poppet valve with spring return |
| Type of reset | Mechanical spring |
| Degree of protection | IP40 |
| Nominal size | 0.65 mm |
| Exhaust-air function | Cannot be throttled |
| Sealing principle | Soft |
| Mounting position | Any |
| Manual override | Detenting Non-detenting |
| Type of piloting | Direct |
| Flow direction | Non-reversible |
| lap | Underlap |
| Signal status display | LED |
| b value | 0.24 |
| C value | 0.048 l/sbar |
| Flow rate of valve | 10 l/min |
| Flow rate of pneumatically interlinked valve | 10 l/min |
| Switching time off | 4.7 ms |
| Switching time on | 5.2 ms |
| Max. positive test pulse with 0 signal | 600 µs |
| Max. negative test pulse with 1 signal | 800 µs |
| Characteristic coil data | 24 V DC: low-current phase 0.3 W, high-current phase 1.0 W |
| Permissible voltage fluctuations | +/-10% |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Media temperature | -5 °C … 50 °C |
| Pilot medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Ambient temperature | -5 °C … 50 °C |
| Product weight | 30 g |
| Electrical connection | Via E-box |
| Pneumatic connection, port 1 | Sub-base |
| Pneumatic connection, port 2 | Sub-base |
| Pneumatic connection, port 3 | Sub-base |
| Pneumatic connection, port 4 | Sub-base |
| Note on materials | RoHS compliant |
| Material seals | NBR PU |
| Material housing | Reinforced PA |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model VOVC-BT-T32C-MT-F-1T1, part number 565450, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists operating voltage as 24 V DC for part number 565450. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | VOVC-BT-T32C-MT-F-1T1 |
| Part Number | 565450 |
| Valve function | 2×3/2 closed monostable |
| Type of actuation | Electrical |
| Valve size | 10 mm |
| pneumatic working port | Sub-base |
| Operating voltage | 24 V DC |
| Operating pressure | 0 psi … 116 psi |







