FESTO VSVA-B-P53E-H-A1-1R2L 534540 Solenoid Valve
The Festo VSVA-B-P53E-H-A1-1R2L (part number 534540) is a solenoid valve. Its product datasheet lists valve function as 5/3 exhausted and standard nominal flow rate (standardised to din 1343) as 1000 l/min.
Description
FESTO VSVA-B-P53E-H-A1-1R2L 534540 Solenoid Valve
The Festo VSVA-B-P53E-H-A1-1R2L (part number 534540) is a solenoid valve. Its product datasheet lists valve function as 5/3 exhausted and standard nominal flow rate (standardised to din 1343) as 1000 l/min.
Key Features
- Valve function: 5/3 exhausted
- Standard nominal flow rate (standardised to DIN 1343): 1000 l/min
- pneumatic working port: Sub-base size 26 mm to ISO 15407-1
- Operating voltage: 24 V DC
Technical Data
| Brand | FESTO |
|---|---|
| Model | VSVA-B-P53E-H-A1-1R2L |
| Part number | 534540 |
| Valve function | 5/3 exhausted |
| Type of actuation | Electrical |
| Construction width | 26 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 1000 l/min |
| pneumatic working port | Sub-base size 26 mm to ISO 15407-1 |
| Operating voltage | 24 V DC |
| Operating pressure | 0.3 MPa … 0.8 MPa |
| Operating pressure | 3 bar … 8 bar |
| Design | Piston gate valve |
| Type of reset | Mechanical spring |
| Degree of protection | IP65 NEMA 4 |
| Nominal size | 9 mm |
| Grid dimension | 27 mm |
| Exhaust-air function | Can be throttled Via throttle plate Via individual sub-base |
| Sealing principle | Soft |
| Mounting position | Any |
| Conforms to standard | ISO 15407-1 |
| Manual override | Non-detenting |
| Type of piloting | Piloted |
| Pilot air supply | Internal |
| Flow direction | Non-reversible |
| lap | Overlap |
| Reverse polarity protection | For all electrical connections |
| Additional functions | Holding current reduction Safety shut-off |
| Signal status display | LED |
| b value | 0.3 |
| C value | 2.9 l/sbar |
| Flow rate of valve | 1400 l/min |
| Flow rate of valve on individual sub-base | 1100 l/min |
| Flow rate of pneumatically interlinked valve | 1000 l/min |
| Switching time off | 52 ms |
| Switching time on | 20 ms |
| Nominal pick-up current per solenoid coil | 110 mA to 20 ms |
| Nominal current with current reduction | 30 mA after 20 ms |
| Permissible voltage fluctuations | +/-10% |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Media temperature | -5 °C … 50 °C |
| Protection against direct and indirect contact | PELV |
| Pilot medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Ambient temperature | -5 °C … 50 °C |
| Max. tightening torque for valve mounting | 1.8 Nm … 2.2 Nm |
| Product weight | 270 g |
| Electrical connection | 4-pin M8x1 Central plug Round design |
| Type of mounting | On sub-base Via through-hole and screw |
| Note on materials | RoHS compliant |
| Material seals | Fluoro rubber HNBR NBR |
| Material housing | Die-cast aluminium |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model VSVA-B-P53E-H-A1-1R2L, part number 534540, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists pneumatic working port as Sub-base size 26 mm to ISO 15407-1 for part number 534540. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Delivery Inspection
Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | VSVA-B-P53E-H-A1-1R2L |
| Part Number | 534540 |
| Valve function | 5/3 exhausted |
| Type of actuation | Electrical |
| Construction width | 26 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 1000 l/min |
| pneumatic working port | Sub-base size 26 mm to ISO 15407-1 |
| Operating voltage | 24 V DC |
| Operating pressure | 3 bar … 8 bar |









