FESTO VSVA-B-P53E-H-A1-1R5L 534560 Solenoid Valve

The Festo VSVA-B-P53E-H-A1-1R5L (part number 534560) is a solenoid valve. Its product datasheet lists valve function as 5/3 exhausted and standard nominal flow rate (standardised to din 1343) as 1000 l/min.

SKU: 534560 Category: Tags: , , Brand:

Description

FESTO VSVA-B-P53E-H-A1-1R5L 534560 Solenoid Valve

The Festo VSVA-B-P53E-H-A1-1R5L (part number 534560) is a solenoid valve. Its product datasheet lists valve function as 5/3 exhausted and standard nominal flow rate (standardised to din 1343) as 1000 l/min.

Key Features

  • Valve function: 5/3 exhausted
  • Standard nominal flow rate (standardised to DIN 1343): 1000 l/min
  • pneumatic working port: Sub-base size 26 mm to ISO 15407-1
  • Operating voltage: 24 V DC

Technical Data

Brand FESTO
Model VSVA-B-P53E-H-A1-1R5L
Part number 534560
Valve function 5/3 exhausted
Type of actuation Electrical
Construction width 26 mm
Standard nominal flow rate (standardised to DIN 1343) 1000 l/min
pneumatic working port Sub-base size 26 mm to ISO 15407-1
Operating voltage 24 V DC
Operating pressure 0.3 MPa … 0.8 MPa
Operating pressure 3 bar … 8 bar
Design Piston gate valve
Type of reset Mechanical spring
Degree of protection IP65
NEMA 4
Nominal size 9 mm
Grid dimension 27 mm
Exhaust-air function Can be throttled
Via throttle plate
Via individual sub-base
Sealing principle Soft
Mounting position Any
Conforms to standard ISO 15407-1
Manual override Non-detenting
Type of piloting Piloted
Pilot air supply Internal
Flow direction Non-reversible
lap Overlap
Reverse polarity protection For all electrical connections
Additional functions Holding current reduction
Safety shut-off
Signal status display LED
b value 0.3
C value 2.9 l/sbar
Flow rate of valve 1400 l/min
Flow rate of valve on individual sub-base 1100 l/min
Flow rate of pneumatically interlinked valve 1000 l/min
Switching time off 52 ms
Switching time on 20 ms
Nominal pick-up current per solenoid coil 110 mA to 20 ms
Nominal current with current reduction 30 mA after 20 ms
Permissible voltage fluctuations +/-10%
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will
always be required)
Media temperature -5 °C … 50 °C
Protection against direct and indirect contact PELV
Pilot medium Compressed air to ISO 8573-1:2010 [7:4:4]
Ambient temperature -5 °C … 50 °C
Max. tightening torque for valve mounting 1.8 Nm … 2.2 Nm
Product weight 270 g
Electrical connection 3-pin
M12x1
Central plug
Round design
Type of mounting On sub-base
Via through-hole and screw
Note on materials RoHS compliant
Material seals Fluoro rubber
HNBR
NBR
Material housing Die-cast aluminium

Application Notes

Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.

Selection and Installation

Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.

Inquiry

For a quotation or replacement enquiry, provide model VSVA-B-P53E-H-A1-1R5L, part number 534560, quantity, destination and clear photos of the original unit when available.

Datasheet Selection Note

Festo lists pneumatic working port as Sub-base size 26 mm to ISO 15407-1 for part number 534560. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

VSVA-B-P53E-H-A1-1R5L

Part Number

534560

Valve function

5/3 exhausted

Type of actuation

Electrical

Construction width

26 mm

Standard nominal flow rate (standardised to DIN 1343)

1000 l/min

pneumatic working port

Sub-base size 26 mm to ISO 15407-1

Operating voltage

24 V DC

Operating pressure

3 bar … 8 bar