FESTO SFAB-600U-HQ10-2SA-M12 565401 Flow Sensor
The Festo SFAB-600U-HQ10-2SA-M12 (part number 565401) is a flow sensor. Its product datasheet lists operating pressure as 0 MPa…1 MPa 0 bar…10 bar 0 psi…145 psi and pneumatic connection as For tubing outside diameter of 10 mm.
Description
FESTO SFAB-600U-HQ10-2SA-M12 565401 Flow Sensor
The Festo SFAB-600U-HQ10-2SA-M12 (part number 565401) is a flow sensor. Its product datasheet lists operating pressure as 0 MPa…1 MPa 0 bar…10 bar 0 psi…145 psi and pneumatic connection as For tubing outside diameter of 10 mm.
Key Features
- Operating pressure: 0 MPa…1 MPa 0 bar…10 bar 0 psi…145 psi
- Pneumatic connection: For tubing outside diameter of 10 mm
- Ambient temperature: 0 °C…50 °C
- Pressure inuence span in ± %FS/bar: 0.5 %FS/b.
Technical Data
| Brand | FESTO |
|---|---|
| Model | SFAB-600U-HQ10-2SA-M12 |
| Part number | 565401 |
| Note on materials | RoHS-compliant |
| Measured variable | Volume Volumetric ow rate |
| Flow direction | Unidirectional P1 -> P2 |
| Measuring principle | Thermal |
| Measurement method | Heat Loss |
| Start value for ow rate measuring range | 6 l/min |
| End value for ow rate measuring range | 600 l/min |
| Operating pressure | 0 MPa…1 MPa 0 bar…10 bar 0 psi…145 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] Nitrogen |
| Media temperature | 0 °C…50 °C |
| Ambient temperature | 0 °C…50 °C |
| Nominal temperature | 23 °C |
| Accuracy of ow rate | ± (3% o.m.v. + 0.3% FS) |
| Repetition accuracy offset in ± %FS | 0.2 %FS |
| Repetition accuracy span in ± %FS | 0.8 %FS |
| Temperature coefficient span in ± %FS/K | Typ. 0.1%FS/K |
| Pressure inuence span in ± %FS/bar | 0.5 %FS/b. |
| Switching output | 2 x PNP or 2 x NPN, switchable |
| Switching function | Window comparator Threshold value comparator |
| Switching element function | N/C or N/O contact, switchable |
| Max. output current | 100 mA |
| Analogue output | 4 – 20 mA |
| Flow characteristic curve start value | 0 l/min |
| Flow characteristic curve end value | 600 l/min |
| Output characteristic curve starting value | 4 mA |
| Output characteristic curve end value | 20 mA |
| Max. load resistance current output | 500 Ohm |
| Short circuit current rating | yes |
| Overload protection | Available |
| Operational voltage range DC | 15 V…30 V |
| No-load supply current | 120 mA |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plugs |
| Electrical connection 1, connector system | M12x1, A-coded to EN 61076-2-101 |
| Electrical connection 1, number of connections/cores | 5 |
| Type of mounting | With through-hole With H-rail |
| Mounting position | optional |
| Pneumatic connection | For tubing outside diameter of 10 mm |
| Product weight | 160 g |
| Material housing | PA-reinforced |
| Display type | Illuminated LCD, multi-colour |
| Displayable units | l l/min m3 scf scfm |
| Setting options | Teach-in Via display and keys |
| Protection against tampering | PIN code |
| Degree of protection | IP65 |
| Pressure drop | 100 mbar |
| Protection class | III |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model SFAB-600U-HQ10-2SA-M12, part number 565401, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists ambient temperature as 0 °C…50 °C for part number 565401. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | SFAB-600U-HQ10-2SA-M12 |
| Part Number | 565401 |
| Note on materials | RoHS-compliant |
| Measured variable | Volume Volumetric ow rate |
| Flow direction | Unidirectional P1 -> P2 |
| Measuring principle | Thermal |
| Measurement method | Heat Loss |
| Start value for ow rate measuring range | 6 l/min |
| End value for ow rate measuring range | 600 l/min |
| Operating pressure | 0 MPa…1 MPa 0 bar…10 bar 0 psi…145 psi |









