FESTO SFAH-10U-Q6S-PNLK-PNVBA-M8 8058470 Flow Sensor
The Festo SFAH-10U-Q6S-PNLK-PNVBA-M8 (part number 8058470) is a flow sensor. Its product datasheet lists operating pressure as -0.9 bar … 10 bar and pneumatic connection as For tubing O.D. 6 mm.
Description
FESTO SFAH-10U-Q6S-PNLK-PNVBA-M8 8058470 Flow Sensor
The Festo SFAH-10U-Q6S-PNLK-PNVBA-M8 (part number 8058470) is a flow sensor. Its product datasheet lists operating pressure as -0.9 bar … 10 bar and pneumatic connection as For tubing O.D. 6 mm.
Key Features
- Operating pressure: -0.9 bar … 10 bar
- Pneumatic connection: For tubing O.D. 6 mm
- Pneumatic connection, outlet direction: Straight
- Start value for flow rate measuring range: 0.2 l/min
Technical Data
| Brand | FESTO |
|---|---|
| Model | SFAH-10U-Q6S-PNLK-PNVBA-M8 |
| Part number | 8058470 |
| Note on materials | RoHS compliant |
| Measured variable | Mass flow rate Volumetric flow rate |
| Flow direction | Unidirectional |
| Measuring principle | thermal |
| Measurement method | Heat transfer |
| Start value for flow rate measuring range | 0.2 l/min |
| End value for flow rate measuring range | 10 l/min |
| Operating pressure | -0.9 bar … 10 bar |
| Operating medium | Compressed air to ISO 8573-1:2010 [6:4:4] Nitrogen |
| Media temperature | 0 °C … 50 °C |
| Ambient temperature | 0 °C … 50 °C |
| Nominal temperature | 23 °C |
| Accuracy of flow rate | ± (2% o.m.v. + 1% FS) |
| Repetition accuracy offset in ± %FS | 0.2 %FS |
| Repetition accuracy span in ± %FS | 0.8 %FS |
| Temperature coefficient span in ± %FS/K | typ. 0.15%FS/K |
| Pressure influence range in ± %FS | Typ. 1 %FS |
| Switching output | 2 x PNP or 2 x NPN, switchable |
| Switching function | Window comparator Threshold value comparator Auto difference monitoring |
| Switching element function | NC or NO, switchable |
| Max. output current | 100 mA |
| Analogue output | 0 – 10 V 4 – 20 mA 1 – 5 V |
| Flow characteristic curve start value | 0 l/min |
| Flow characteristic curve end value | 10 l/min |
| Max. load resistance current output | 500 Ohm |
| Min. load resistance voltage output | 20 kOhm |
| Short circuit current rating | Yes |
| Overload protection | Available |
| Operational voltage range DC | 22 V … 26 V |
| No-load supply current | ≤25 mA |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | M8x1, A-coded, to EN 61076-2-104 |
| Electrical connection 1, number of connections/cores | 4 |
| Electrical connection 1, type of mounting | Snap-locking Screw-type lock Not rotatable |
| Electrical connection 1, compatible type of mounting | Compatible with latching lock Compatible with rotatable screw-type lock |
| Electrical connection 1, connection pattern | 00991171 |
| Type of mounting | With accessories |
| Mounting position | Any |
| Pneumatic connection | For tubing O.D. 6 mm |
| Pneumatic connection, outlet direction | Straight |
| Product weight | 60 g |
| Material housing | Reinforced PA |
| Material in contact with the medium | Anodised wrought aluminium alloy Epoxy NBR Reinforced PA Silicon Silicon nitride High-alloy stainless steel |
| Protection against tampering | IO-Link® PIN code |
| Degree of protection | IP40 |
| Pressure drop | <5 mbar |
| Protection class | III |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model SFAH-10U-Q6S-PNLK-PNVBA-M8, part number 8058470, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists pneumatic connection, outlet direction as Straight for part number 8058470. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Spare Parts Records
Keeping a clear record of installed components can make future maintenance and purchasing more efficient. For this product, record the brand, full model code, important specifications, and equipment location. Update the record whenever a component or machine configuration changes, so the next replacement decision is based on current information.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | SFAH-10U-Q6S-PNLK-PNVBA-M8 |
| Part Number | 8058470 |
| Note on materials | RoHS compliant |
| Measured variable | Mass flow rate Volumetric flow rate |
| Flow direction | Unidirectional |
| Measuring principle | thermal |
| Measurement method | Heat transfer |
| Start value for flow rate measuring range | 0.2 l/min |
| End value for flow rate measuring range | 10 l/min |
| Operating pressure | -0.9 bar … 10 bar |









