FESTO SFAH-1U-Q4S-PNLK-PNVBA-M8 8058466 Flow Sensor

The Festo SFAH-1U-Q4S-PNLK-PNVBA-M8 (part number 8058466) is a flow sensor. Its product datasheet lists operating pressure as -0.9 bar … 10 bar and pneumatic connection as For tubing O.D. 4 mm.

SKU: 8058466 Category: Tags: , , Brand:

Description

FESTO SFAH-1U-Q4S-PNLK-PNVBA-M8 8058466 Flow Sensor

The Festo SFAH-1U-Q4S-PNLK-PNVBA-M8 (part number 8058466) is a flow sensor. Its product datasheet lists operating pressure as -0.9 bar … 10 bar and pneumatic connection as For tubing O.D. 4 mm.

Key Features

  • Operating pressure: -0.9 bar … 10 bar
  • Pneumatic connection: For tubing O.D. 4 mm
  • Pneumatic connection, outlet direction: Straight
  • Start value for flow rate measuring range: 0.02 l/min

Technical Data

Brand FESTO
Model SFAH-1U-Q4S-PNLK-PNVBA-M8
Part number 8058466
Note on materials RoHS compliant
Measured variable Mass flow rate
Volumetric flow rate
Flow direction Unidirectional
Measuring principle thermal
Measurement method Heat transfer
Start value for flow rate measuring range 0.02 l/min
End value for flow rate measuring range 1 l/min
Operating pressure -0.9 bar … 10 bar
Operating medium Compressed air to ISO 8573-1:2010 [6:4:4]
Nitrogen
Media temperature 0 °C … 50 °C
Ambient temperature 0 °C … 50 °C
Nominal temperature 23 °C
Accuracy of flow rate ± (2% o.m.v. + 1% FS)
Repetition accuracy offset in ± %FS 0.2 %FS
Repetition accuracy span in ± %FS 0.8 %FS
Temperature coefficient span in ± %FS/K typ. 0.15%FS/K
Pressure influence range in ± %FS Typ. 1 %FS
Switching output 2 x PNP or 2 x NPN, switchable
Switching function Window comparator
Threshold value comparator
Auto difference monitoring
Switching element function NC or NO, switchable
Max. output current 100 mA
Analogue output 0 – 10 V
4 – 20 mA
1 – 5 V
Flow characteristic curve start value 0 l/min
Flow characteristic curve end value 1 l/min
Max. load resistance current output 500 Ohm
Min. load resistance voltage output 20 kOhm
Short circuit current rating Yes
Overload protection Available
Operational voltage range DC 22 V … 26 V
No-load supply current ≤25 mA
Reverse polarity protection For all electrical connections
Electrical connection 1, connection type Plug
Electrical connection 1, connector system M8x1, A-coded, to EN 61076-2-104
Electrical connection 1, number of connections/cores 4
Electrical connection 1, type of mounting Snap-locking
Screw-type lock
Not rotatable
Electrical connection 1, compatible type of mounting Compatible with latching lock
Compatible with rotatable screw-type lock
Electrical connection 1, connection pattern 00991171
Type of mounting With accessories
Mounting position Any
Pneumatic connection For tubing O.D. 4 mm
Pneumatic connection, outlet direction Straight
Product weight 60 g
Material housing Reinforced PA
Material in contact with the medium Anodised wrought aluminium alloy
Epoxy
NBR
Reinforced PA
Silicon
Silicon nitride
High-alloy stainless steel
Protection against tampering IO-Link®
PIN code
Degree of protection IP40
Pressure drop <5 mbar
Protection class III

Application Notes

Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.

Selection and Installation

Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.

Inquiry

For a quotation or replacement enquiry, provide model SFAH-1U-Q4S-PNLK-PNVBA-M8, part number 8058466, quantity, destination and clear photos of the original unit when available.

Datasheet Selection Note

Festo lists pneumatic connection, outlet direction as Straight for part number 8058466. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.

Full Model Verification

Use the full model code when confirming FESTO SFAH-1U-Q4S-PNLK-PNVBA-M8 8058466 Flow Sensor. A shared series name does not mean two versions have the same voltage, port size, material, or mounting arrangement. Compare the original nameplate with the available datasheet, equipment records, and installation details to identify the exact version required.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

SFAH-1U-Q4S-PNLK-PNVBA-M8

Part Number

8058466

Note on materials

RoHS compliant

Measured variable

Mass flow rate Volumetric flow rate

Flow direction

Unidirectional

Measuring principle

thermal

Measurement method

Heat transfer

Start value for flow rate measuring range

0.02 l/min

End value for flow rate measuring range

1 l/min

Operating pressure

-0.9 bar … 10 bar