FESTO SPAN-B-V1R-Q4-PN-L1 8114761 Pressure Sensor
The Festo SPAN-B-V1R-Q4-PN-L1 (part number 8114761) is a pressure sensor. Its product datasheet lists pneumatic connection as For tubing O.D. 4 mm and start value for pressure measuring range as 0 MPa.
Description
FESTO SPAN-B-V1R-Q4-PN-L1 8114761 Pressure Sensor
The Festo SPAN-B-V1R-Q4-PN-L1 (part number 8114761) is a pressure sensor. Its product datasheet lists pneumatic connection as For tubing O.D. 4 mm and start value for pressure measuring range as 0 MPa.
Key Features
- Pneumatic connection: For tubing O.D. 4 mm
- Start value for pressure measuring range: 0 MPa
- End value for pressure measuring range: -0.1 MPa
- Max. overload pressure: 5 bar
Technical Data
| Brand | FESTO |
|---|---|
| Model | SPAN-B-V1R-Q4-PN-L1 |
| Part number | 8114761 |
| Note on materials | RoHS compliant |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | 0 MPa |
| Start value for pressure measuring range | 0 bar |
| Start value for pressure measuring range | 0 psi |
| End value for pressure measuring range | -0.1 MPa |
| End value for pressure measuring range | -1 bar |
| End value for pressure measuring range | -14.5 psi |
| Max. overload pressure | 5 bar |
| Overload pressure | 0.5 MPa |
| Overload pressure | 5 bar |
| Overload pressure | 72.5 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gas |
| Note on operating and pilot medium | Lubricated operation possible |
| Media temperature | 0 °C … 50 °C |
| Ambient temperature | 0 °C … 50 °C |
| Accuracy in ± % FS | 1.5 %FS |
| Repetition accuracy in ± %FS | 0.3 %FS |
| Temperature coefficient in ± %FS/K | 0.1 %FS/K |
| Switching output | PNP/NPN, switchable |
| Switching function | Window comparator Threshold value comparator |
| Switching element function | NC or NO, switchable |
| Max. output current | 80 mA |
| Short circuit current rating | Yes |
| Operational voltage range DC | 10.8 V … 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | Plug pattern L1J |
| Electrical connection 1, number of connections/cores | 4 |
| Electrical connection 1, connection pattern | 00995428 |
| Type of mounting | Front panel mounting Via wall/surface bracket |
| Mounting position | Any |
| Pneumatic connection | For tubing O.D. 4 mm |
| Product weight | 21 g |
| Material housing | Reinforced PA |
| Material in contact with the medium | Fluoro rubber NBR Reinforced PA |
| Display type | Illuminated LCD |
| Displayable units | MPa bar inHg kPa mmHg psi |
| Setting options | Teach-in Via display and buttons |
| Protection against tampering | PIN code |
| Setting range threshold value | 0 % … 100 % |
| Setting range hysteresis | 0 % … 90 % |
| Degree of protection | IP40 |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 4 according to ISO 14644-1 |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model SPAN-B-V1R-Q4-PN-L1, part number 8114761, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists end value for pressure measuring range as -0.1 MPa for part number 8114761. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Delivery Inspection
Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | SPAN-B-V1R-Q4-PN-L1 |
| Part Number | 8114761 |
| Note on materials | RoHS compliant |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | 0 psi |
| End value for pressure measuring range | -1 bar |









