FESTO SPAN-V1R-G18M-PNLK-PNVBA-L1 8035535 Pressure Sensor
The Festo SPAN-V1R-G18M-PNLK-PNVBA-L1 (part number 8035535) is a pressure sensor. Its product datasheet lists pneumatic connection as Male thread G1/8 Female thread M5 and start value for pressure measuring range as 0 MPa.
Description
FESTO SPAN-V1R-G18M-PNLK-PNVBA-L1 8035535 Pressure Sensor
The Festo SPAN-V1R-G18M-PNLK-PNVBA-L1 (part number 8035535) is a pressure sensor. Its product datasheet lists pneumatic connection as Male thread G1/8 Female thread M5 and start value for pressure measuring range as 0 MPa.
Key Features
- Pneumatic connection: Male thread G1/8 Female thread M5
- Start value for pressure measuring range: 0 MPa
- End value for pressure measuring range: -0.1 MPa
- Max. overload pressure: 5 bar
Technical Data
| Brand | FESTO |
|---|---|
| Model | SPAN-V1R-G18M-PNLK-PNVBA-L1 |
| Part number | 8035535 |
| Note on materials | RoHS compliant |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | 0 MPa |
| Start value for pressure measuring range | 0 bar |
| Start value for pressure measuring range | 0 psi |
| End value for pressure measuring range | -0.1 MPa |
| End value for pressure measuring range | -1 bar |
| End value for pressure measuring range | -14.5 psi |
| Max. overload pressure | 5 bar |
| Overload pressure | 0.5 MPa |
| Overload pressure | 5 bar |
| Overload pressure | 72.5 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gas |
| Note on operating and pilot medium | Lubricated operation possible |
| Media temperature | 0 °C … 50 °C |
| Ambient temperature | 0 °C … 50 °C |
| Accuracy in ± % FS | 1.5 %FS |
| Repetition accuracy in ± %FS | 0.3 %FS |
| Temperature coefficient in ± %FS/K | 0.05 %FS/K |
| Switching output | 2 x PNP or 2 x NPN, switchable |
| Switching function | Window comparator Threshold value comparator Auto difference monitoring |
| Switching element function | NC or NO, switchable |
| Max. output current | 100 mA |
| Analogue output | 0 – 10 V 4 – 20 mA 1 – 5 V |
| Max. load resistance current output | 500 Ohm |
| Min. load resistance voltage output | 20 kOhm |
| Short circuit current rating | Yes |
| Protocol | IO-Link® |
| IO-Link, Protocol version | Device V 1.1 |
| IO-Link, Profile | Smart sensor profile |
| IO-Link, Function classes | Binary data channel (BDC) Process data variable (PDV) Identification Diagnostics Teach channel |
| IO-Link, communication mode | COM2 (38.4 kBaud) |
| IO-Link, SIO-Mode support | Yes |
| Operational voltage range DC | 15 V … 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | Plug pattern L1J |
| Electrical connection 1, number of connections/cores | 4 |
| Electrical connection 1, connection pattern | 00995428 |
| Type of mounting | Front panel mounting With thread Via wall/surface bracket |
| Mounting position | Any |
| Pneumatic connection | Male thread G1/8 Female thread M5 |
| Product weight | 46 g |
| Material housing | Reinforced PA |
| Material in contact with the medium | Fluoro rubber High-alloy stainless steel |
| Protection against tampering | IO-Link® PIN code |
| Degree of protection | IP40 |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model SPAN-V1R-G18M-PNLK-PNVBA-L1, part number 8035535, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists end value for pressure measuring range as -0.1 MPa for part number 8035535. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | SPAN-V1R-G18M-PNLK-PNVBA-L1 |
| Part Number | 8035535 |
| Note on materials | RoHS compliant |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | 0 psi |
| End value for pressure measuring range | -1 bar |







