FESTO SDE5-V1-FP-Q6-P-M8 542887 Pressure Sensor
The Festo SDE5-V1-FP-Q6-P-M8 (part number 542887) is a pressure sensor. Its product datasheet lists pneumatic connection as QS-6 and start value for pressure measuring range as 0 MPa 0 bar 0 psi.
Description
FESTO SDE5-V1-FP-Q6-P-M8 542887 Pressure Sensor
The Festo SDE5-V1-FP-Q6-P-M8 (part number 542887) is a pressure sensor. Its product datasheet lists pneumatic connection as QS-6 and start value for pressure measuring range as 0 MPa 0 bar 0 psi.
Key Features
- Pneumatic connection: QS-6
- Start value for pressure measuring range: 0 MPa 0 bar 0 psi
- End value for pressure measuring range: -0.1 MPa -1 bar -14.5 psi
- Overload pressure: 0.5 MPa 5 bar 72.5 psi
Technical Data
| Brand | FESTO |
|---|---|
| Model | SDE5-V1-FP-Q6-P-M8 |
| Part number | 542887 |
| Note on materials | RoHS compliant |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | 0 MPa 0 bar 0 psi |
| End value for pressure measuring range | -0.1 MPa -1 bar -14.5 psi |
| Overload pressure | 0.5 MPa 5 bar 72.5 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible |
| Media temperature | 0 °C…50 °C |
| Ambient temperature | 0 °C…50 °C |
| Accuracy in ± % FS | 0.5 %FS |
| Repetition accuracy in ± %FS | 0.3 %FS |
| Temperature coefficient in ± %FS/K | 0.05 %FS/K |
| Switching output | PNP |
| Switching function | Freely programmable |
| Switching element function | Switchable |
| Hysteresis in ± %FS | 2 %FS |
| Switch-on time | 2 ms |
| Switch-off time | 2 ms |
| Max. output current | 100 mA |
| Voltage drop | 1.8 V |
| Short circuit current rating | Yes |
| Overload protection | Yes |
| Operational voltage range DC | 15 V…30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | M8x1, A-coded, to EN 61076-2-104 |
| Electrical connection 1, number of connections/cores | 3 |
| Electrical connection 1, type of mounting | Snap-locking Screw-type lock Not rotatable |
| Electrical connection 1, compatible type of mounting | Compatible with latching lock Compatible with rotatable screw-type lock |
| Material connector housing | Brass, nickel-plated |
| Max. cable length | 30 M |
| Type of mounting | With accessories |
| Mounting position | Any |
| Pneumatic connection | QS-6 |
| Product weight | 19 g |
| Material housing | Reinforced PA Reinforced POM |
| Material sealing ring | Fluoro rubber NBR |
| Switching status indication | Yellow LED |
| Setting options | Teach-in |
| Setting range threshold value | 0 %…100 % |
| Degree of protection | IP40 |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 4 according to ISO 14644-1 |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model SDE5-V1-FP-Q6-P-M8, part number 542887, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists end value for pressure measuring range as -0.1 MPa -1 bar -14.5 psi for part number 542887. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | SDE5-V1-FP-Q6-P-M8 |
| Part Number | 542887 |
| Note on materials | RoHS compliant |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | 0 MPa 0 bar 0 psi |
| End value for pressure measuring range | -0.1 MPa -1 bar -14.5 psi |
| Overload pressure | 0.5 MPa 5 bar 72.5 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible |









