FESTO SPAB-P10R-G18-PB-M8 553164 Pressure Sensor
The Festo SPAB-P10R-G18-PB-M8 (part number 553164) is a pressure sensor. Its product datasheet lists operating voltage range dc as 12 … 24 V and pneumatic connection as Male thread G1/8 Female thread M5.
Description
FESTO SPAB-P10R-G18-PB-M8 553164 Pressure Sensor
The Festo SPAB-P10R-G18-PB-M8 (part number 553164) is a pressure sensor. Its product datasheet lists operating voltage range dc as 12 … 24 V and pneumatic connection as Male thread G1/8 Female thread M5.
Key Features
- Operating voltage range DC: 12 … 24 V
- Pneumatic connection: Male thread G1/8 Female thread M5
- Pressure measuring range, initial value: 0 bar
- Pressure measuring range, final value: 10 bar
Technical Data
| Brand | FESTO |
|---|---|
| Model | SPAB-P10R-G18-PB-M8 |
| Part number | 553164 |
| Authorisation | RCM Mark c UL us – Recognized (OL) |
| Materials note | Contains PWIS substances Conforms to RoHS |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor with display |
| Pressure measuring range, initial value | 0 bar |
| Pressure measuring range, final value | 10 bar |
| Overload range | 15 bar |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation not possible |
| Ambient temperature | -10 … 50 °C |
| Switch output | PNP |
| Switching function | Freely programmable |
| Switching element function | Switchable |
| Repetition accuracy of switching output in ± %FS | 0.2 %FS |
| Max. output current | 100 mA |
| Analogue output | 4 – 20 mA 1 – 5 V |
| Precision analogue output zero point in ± %FS | 5 %FS |
| Precision analogue output margin in ± %FS | 5 %FS |
| Repetition accuracy of analogue output in ± %FS | 0.2 %FS |
| Precision display FS | 2 %FS |
| Short circuit strength | Yes |
| Operating voltage range DC | 12 … 24 V |
| Polarity protected | for all electrical connections |
| Electrical connection | Plug Round design to EN 60947-5-2 M8x1 4-pin |
| Mounting type | Optional Threaded with accessories |
| Pneumatic connection | Male thread G1/8 Female thread M5 |
| Product weight | 45 g |
| Materials information, housing | ABS-reinforced PBT-reinforced |
| Type of display | Illuminated LCD, multicoloured |
| Unit(s) that can be displayed | MPa bar kPa kgf/cm² psi |
| Operating status display | LCD, yellow |
| Setting options | Teach-In Via display and buttons |
| Protection against manipulation | PIN-Code |
| Threshold value setting range | 0 … 100 % |
| Hysteresis setting range | 0 … 90 % |
| Protection class | IP40 |
| Corrosion resistance classification CRC | 2 – Moderate corrosion stress |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model SPAB-P10R-G18-PB-M8, part number 553164, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists pressure measuring range, initial value as 0 bar for part number 553164. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | SPAB-P10R-G18-PB-M8 |
| Part Number | 553164 |
| Authorisation | RCM Mark c UL us – Recognized (OL) |
| Materials note | Contains PWIS substances Conforms to RoHS |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor with display |
| Pressure measuring range, initial value | 0 bar |
| Pressure measuring range, final value | 10 bar |
| Overload range | 15 bar |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] |









