FESTO SPAU-P10R-W-G18FD-L-PNLK-PNVBA-M8U 8001231 Pressure Sensor
The Festo SPAU-P10R-W-G18FD-L-PNLK-PNVBA-M8U (part number 8001231) is a pressure sensor. Its product datasheet lists pneumatic connection as G1/8 and start value for pressure measuring range as 0 MPa.
Description
FESTO SPAU-P10R-W-G18FD-L-PNLK-PNVBA-M8U 8001231 Pressure Sensor
The Festo SPAU-P10R-W-G18FD-L-PNLK-PNVBA-M8U (part number 8001231) is a pressure sensor. Its product datasheet lists pneumatic connection as G1/8 and start value for pressure measuring range as 0 MPa.
Key Features
- Pneumatic connection: G1/8
- Start value for pressure measuring range: 0 MPa
- End value for pressure measuring range: 1 MPa
- Overload pressure: 1.5 MPa
Technical Data
| Brand | FESTO |
|---|---|
| Model | SPAU-P10R-W-G18FD-L-PNLK-PNVBA-M8U |
| Part number | 8001231 |
| KC mark | KC-EMV |
| Note on materials | RoHS compliant |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | 0 MPa |
| Start value for pressure measuring range | 0 bar |
| Start value for pressure measuring range | 0 psi |
| End value for pressure measuring range | 1 MPa |
| End value for pressure measuring range | 10 bar |
| End value for pressure measuring range | 145 psi |
| Overload pressure | 1.5 MPa |
| Overload pressure | 15 bar |
| Overload pressure | 217.5 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gas |
| Note on operating and pilot medium | Lubricated operation possible |
| Media temperature | 0 °C … 50 °C |
| Ambient temperature | 0 °C … 50 °C |
| Resolution ADC | 12 bit |
| Accuracy in ± % FS | 1.5 %FS |
| Repetition accuracy in ± %FS | 0.3 %FS |
| Temperature coefficient in ± %FS/K | 0.05 %FS/K |
| Switching output | 2 x PNP or 2 x NPN, switchable |
| Switching function | Freely programmable |
| Switching element function | NC or NO, switchable |
| Max. output current | 100 mA |
| Analogue output | 0 – 10 V 4 – 20 mA 1 – 5 V |
| Rise time | 3 ms |
| Max. load resistance current output | 500 Ohm |
| Min. load resistance voltage output | 10 kOhm |
| Short circuit current rating | Yes |
| Overload protection | Yes |
| Protocol | IO-Link® |
| IO-Link, Protocol version | Device V 1.1 |
| Operational voltage range DC | 20 V … 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | M8x1, A-coded, to EN 61076-2-104 |
| Electrical connection 1, number of connections/cores | 4 |
| Electrical connection 1, type of mounting | Not rotatable |
| Electrical connection 1, compatible type of mounting | Compatible with latching lock Compatible with rotatable screw-type lock |
| Electrical connection 1, connection pattern | 00991171 |
| Type of mounting | Via wall/surface bracket |
| Mounting position | Any |
| Pneumatic connection | G1/8 |
| Product weight | 80 g |
| Material in contact with the medium | High-alloy stainless steel |
| Protection against tampering | IO-Link® PIN code |
| Degree of protection | IP65 IP67 |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model SPAU-P10R-W-G18FD-L-PNLK-PNVBA-M8U, part number 8001231, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists end value for pressure measuring range as 1 MPa for part number 8001231. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Documentation Before Ordering
If the original part has an unclear suffix or incomplete marking, gather the available information before placing an order. Photos of the nameplate, the equipment manual, previous purchase records, and connection details can help narrow down the correct version. Keep any specification that remains uncertain open for confirmation instead of assuming a match.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | SPAU-P10R-W-G18FD-L-PNLK-PNVBA-M8U |
| Part Number | 8001231 |
| KC mark | KC-EMV |
| Note on materials | RoHS compliant |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | 0 psi |
| End value for pressure measuring range | 1 MPa |









