FESTO SDE1-V1-G2-HQ4-L-P2-M8 529977 Pressure Sensor
The Festo SDE1-V1-G2-HQ4-L-P2-M8 (part number 529977) is a pressure sensor. Its product datasheet lists operating voltage range dc as 15 … 30 V and pneumatic connection as QS-4.
Description
FESTO SDE1-V1-G2-HQ4-L-P2-M8 529977 Pressure Sensor
The Festo SDE1-V1-G2-HQ4-L-P2-M8 (part number 529977) is a pressure sensor. Its product datasheet lists operating voltage range dc as 15 … 30 V and pneumatic connection as QS-4.
Key Features
- Operating voltage range DC: 15 … 30 V
- Pneumatic connection: QS-4
- Pressure measuring range, initial value: 0 bar
- Pressure measuring range, final value: -1 bar
Technical Data
| Brand | FESTO |
|---|---|
| Model | SDE1-V1-G2-HQ4-L-P2-M8 |
| Part number | 529977 |
| Authorisation | RCM Mark c UL us – Recognized (OL) |
| Materials note | Free of copper and PTFE Conforms to RoHS |
| Measured variable | Differential pressure Relative pressure |
| Measurement method | Piezoresistive pressure sensor with display |
| Pressure measuring range, initial value | 0 bar |
| Pressure measuring range, final value | -1 bar |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible |
| Medium temperature | 0 … 50 °C |
| Ambient temperature | 0 … 50 °C |
| Accuracy, FS | 2 %FS |
| Switch output | 2xPNP |
| Switching function | Freely programmable |
| Switching element function | Switchable |
| Switching point reproducibility | 0.3 % |
| Max. output current | 150 mA |
| Short circuit strength | Pulsing |
| Operating voltage range DC | 15 … 30 V |
| Polarity protected | for all electrical connections |
| Electrical connection | Plug Round design to EN 60947-5-2 M8x1 4-pin |
| Mounting type | with top-hat rail |
| Assembly position | Any |
| Pneumatic connection | QS-4 |
| Product weight | 70 g |
| Material housing | PA POM-reinforced |
| Type of display | illuminated LCD |
| Operating status display | LCD |
| Setting options | Teach-In |
| Protection against manipulation | PIN-Code |
| Threshold value setting range | 2 … 99.8 % |
| Hysteresis setting range | 0 … 90 % |
| Protection class | IP65 |
| Corrosion resistance classification CRC | 2 – Moderate corrosion stress |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model SDE1-V1-G2-HQ4-L-P2-M8, part number 529977, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists pressure measuring range, initial value as 0 bar for part number 529977. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | SDE1-V1-G2-HQ4-L-P2-M8 |
| Part Number | 529977 |
| Authorisation | RCM Mark c UL us – Recognized (OL) |
| Materials note | Free of copper and PTFE Conforms to RoHS |
| Measured variable | Differential pressure Relative pressure |
| Measurement method | Piezoresistive pressure sensor with display |
| Pressure measuring range, initial value | 0 bar |
| Pressure measuring range, final value | -1 bar |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible |









