FESTO VABF-S1-1-R1C2-C-10 546818 Regulator Plate
The Festo VABF-S1-1-R1C2-C-10 (part number 546818) is a regulator plate. Its product datasheet lists selection of pressure gauge as possible and pressure regulation range as 0.05 MPa … 1 MPa.
Description
FESTO VABF-S1-1-R1C2-C-10 546818 Regulator Plate
The Festo VABF-S1-1-R1C2-C-10 (part number 546818) is a regulator plate. Its product datasheet lists selection of pressure gauge as possible and pressure regulation range as 0.05 MPa … 1 MPa.
Key Features
- Selection of pressure gauge: possible
- Pressure regulation range: 0.05 MPa … 1 MPa
- Inlet pressure 1: 0.5 bar … 10 bar
- Degree of protection: IP65 NEMA 4
Technical Data
| Brand | FESTO |
|---|---|
| Model | VABF-S1-1-R1C2-C-10 |
| Part number | 546818 |
| Construction width | 42 mm |
| Based on standard | ISO 5599-1 |
| Mounting position | Any |
| Vertical pneumatic linkage | Pressure regulator for 1 |
| Controller function | Output pressure constant With secondary exhausting |
| Selection of pressure gauge | possible |
| Pressure regulation range | 0.05 MPa … 1 MPa |
| Pressure regulation range | 0.5 bar … 10 bar |
| Pressure regulation range | 7.25 psi … 145 psi |
| Inlet pressure 1 | 0.5 bar … 10 bar |
| Inlet pressure 1 | 0.05 MPa … 1 MPa |
| Inlet pressure 1 | 7.25 psi … 145 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 0 – No corrosion stress |
| Degree of protection | IP65 NEMA 4 |
| Ambient temperature | -5 °C … 50 °C |
| Product weight | 640 g |
| Mounting with vertical stacking | On manifold sub-base On individual sub-base |
| Pressure gauge connection | With retaining clamp |
| Note on materials | RoHS compliant |
| Material control panel | PA |
| Material regulator housing | Die-cast aluminium |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model VABF-S1-1-R1C2-C-10, part number 546818, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists inlet pressure 1 as 0.5 bar … 10 bar for part number 546818. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Functional Check After Replacement
After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | VABF-S1-1-R1C2-C-10 |
| Part Number | 546818 |
| Construction width | 42 mm |
| Based on standard | ISO 5599-1 |
| Mounting position | Any |
| Vertical pneumatic linkage | Pressure regulator for 1 |
| Controller function | Output pressure constant With secondary exhausting |
| Selection of pressure gauge | possible |
| Pressure regulation range | 0.5 bar … 10 bar |







