FESTO VUVG-L10-P53E-T-M5-1P3 566460 Solenoid Valve
The Festo VUVG-L10-P53E-T-M5-1P3 (part number 566460) is a solenoid valve. Its product datasheet lists valve function as 5/3 exhausted and standard nominal flow rate (standardised to din 1343) as 210 l/min.
Description
FESTO VUVG-L10-P53E-T-M5-1P3 566460 Solenoid Valve
The Festo VUVG-L10-P53E-T-M5-1P3 (part number 566460) is a solenoid valve. Its product datasheet lists valve function as 5/3 exhausted and standard nominal flow rate (standardised to din 1343) as 210 l/min.
Key Features
- Valve function: 5/3 exhausted
- Standard nominal flow rate (standardised to DIN 1343): 210 l/min
- pneumatic working port: M5
- Operating voltage: 24 V DC
Technical Data
| Brand | FESTO |
|---|---|
| Model | VUVG-L10-P53E-T-M5-1P3 |
| Part number | 566460 |
| Valve function | 5/3 exhausted |
| Type of actuation | Electrical |
| Valve size | 10 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 210 l/min |
| pneumatic working port | M5 |
| Operating voltage | 24 V DC |
| Operating pressure | 0.3 MPa … 0.8 MPa |
| Operating pressure | 3 bar … 8 bar |
| Design | Piston gate valve |
| Type of reset | Mechanical spring |
| Degree of protection | IP40 IP65 With plug socket |
| Nominal size | 3.2 mm |
| Exhaust-air function | Can be throttled |
| Sealing principle | Soft |
| Mounting position | Any |
| Manual override | Detenting Non-detenting Concealed |
| Type of piloting | Piloted |
| Pilot air supply | Internal |
| lap | Indeterminate overlap |
| Pilot pressure | 0.3 MPa … 0.8 MPa |
| Pilot pressure | 3 bar … 8 bar |
| Suitability for vacuum | No |
| Switching time off | 30 ms |
| Switching time on | 11 ms |
| Switching time reversal | 14 ms |
| Duty cycle | 100% |
| Max. positive test pulse with 0 signal | 700 µs |
| Max. negative test pulse with 1 signal | 900 µs |
| Characteristic coil data | 24 V DC: 1.0 W 24 V DC: low-current phase 0.3 W, high-current phase 1.0 W |
| Permissible voltage fluctuations | +/-10% |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Restrictions for environmental and media temperature | -5 – 50 °C Without holding current reduction |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Media temperature | -5 °C … 60 °C |
| Ambient temperature | -5 °C … 60 °C |
| Product weight | 55 g |
| Electrical connection | Via electrical sub-base |
| Type of mounting | Either: On manifold rail With through-hole |
| Pneumatic connection, port 1 | M5 |
| Pneumatic connection, port 2 | M5 |
| Pneumatic connection, port 3 | M5 |
| Pneumatic connection, port 4 | M5 |
| Pneumatic connection, port 5 | M5 |
| Note on materials | RoHS compliant |
| Material seals | HNBR NBR |
| Material housing | Wrought aluminium alloy |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model VUVG-L10-P53E-T-M5-1P3, part number 566460, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists pneumatic working port as M5 for part number 566460. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Application Review
When considering this solenoid valve for an industrial application, review the operating conditions of the equipment rather than relying on the product name alone. Confirm the required connections, available space, duty pattern, and surrounding environment. The final selection should follow the complete product specification and the machine manufacturer's requirements.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | VUVG-L10-P53E-T-M5-1P3 |
| Part Number | 566460 |
| Valve function | 5/3 exhausted |
| Type of actuation | Electrical |
| Valve size | 10 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 210 l/min |
| pneumatic working port | M5 |
| Operating voltage | 24 V DC |
| Operating pressure | 3 bar … 8 bar |









