FESTO SDE3-V1D-B-HQ4-2P-M8 540196 Pressure Sensor
The Festo SDE3-V1D-B-HQ4-2P-M8 (part number 540196) is a pressure sensor. Its product datasheet lists pneumatic connection as QS-4 and start value for pressure measuring range as 0 MPa.
Description
FESTO SDE3-V1D-B-HQ4-2P-M8 540196 Pressure Sensor
The Festo SDE3-V1D-B-HQ4-2P-M8 (part number 540196) is a pressure sensor. Its product datasheet lists pneumatic connection as QS-4 and start value for pressure measuring range as 0 MPa.
Key Features
- Pneumatic connection: QS-4
- Start value for pressure measuring range: 0 MPa
- End value for pressure measuring range: -0.1 MPa
- Overload pressure: 0.5 MPa
Technical Data
| Brand | FESTO |
|---|---|
| Model | SDE3-V1D-B-HQ4-2P-M8 |
| Part number | 540196 |
| Note on materials | RoHS compliant |
| Measured variable | 2 x relative pressure |
| Measurement method | Piezoresistive pressure sensor with display |
| Start value for pressure measuring range | 0 MPa |
| Start value for pressure measuring range | 0 bar |
| Start value for pressure measuring range | 0 psi |
| End value for pressure measuring range | -0.1 MPa |
| End value for pressure measuring range | -1 bar |
| End value for pressure measuring range | -14.5 psi |
| Overload pressure | 0.5 MPa |
| Overload pressure | 5 bar |
| Overload pressure | 72.5 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible |
| Media temperature | 0 °C … 50 °C |
| Ambient temperature | 0 °C … 50 °C |
| Accuracy in ± % FS | 2 %FS … 3 %FS |
| Repetition accuracy in ± %FS | 0.3 %FS |
| Temperature coefficient in ± %FS/K | 0.05 %FS/K |
| Switching output | 2xPNP |
| Switching function | Freely programmable |
| Switching element function | Switchable |
| Reproducibility of switching value | 0.3 % |
| Switch-on time | 3 ms |
| Switch-off time | 3 ms |
| Max. output current | 100 mA |
| Voltage drop | 1.5 V |
| Display range start value | 0 %FS |
| Display range end value | 100 %FS |
| Short circuit current rating | Yes |
| Overload protection | Yes |
| Operational voltage range DC | 15 V … 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | M8x1, A-coded, to EN 61076-2-104 |
| Electrical connection 1, number of connections/cores | 4 |
| Electrical connection 1, type of mounting | Snap-locking Screw-type lock Not rotatable |
| Electrical connection 1, compatible type of mounting | Compatible with latching lock Compatible with rotatable screw-type lock |
| Electrical connection 1, connection pattern | 00991171 |
| Type of mounting | With through-hole via DIN rail |
| Mounting position | Any |
| Pneumatic connection | QS-4 |
| Product weight | 37 g |
| Material housing | Reinforced PA |
| Material in contact with the medium | Fluoro rubber Brass, nickel-plated NBR Reinforced PA |
| Display type | Illuminated LCD |
| Protection against tampering | PIN code |
| Degree of protection | IP65 |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model SDE3-V1D-B-HQ4-2P-M8, part number 540196, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists end value for pressure measuring range as -0.1 MPa for part number 540196. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Maintenance Inspection
Before replacing SDE3-V1D-B-HQ4-2P-M8, examine the existing installation for issues that may affect the new part. Check the original label, ports, seals, fittings, cables, and mounting points as applicable. Finding a leak, worn connection, or loose contact before installation can help avoid repeating the same problem after replacement.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | SDE3-V1D-B-HQ4-2P-M8 |
| Part Number | 540196 |
| Note on materials | RoHS compliant |
| Measured variable | 2 x relative pressure |
| Measurement method | Piezoresistive pressure sensor with display |
| Start value for pressure measuring range | 0 psi |
| End value for pressure measuring range | -1 bar |







