FESTO CPX-AP-I-8DI-M8-3P 8086600 Digital Input Module
The Festo CPX-AP-I-8DI-M8-3P (part number 8086600) is a digital input module. Its product datasheet lists type of mounting as On DIN rail via accessories With through-hole and ambient temperature as -20 °C … 60 °C.
Description
FESTO CPX-AP-I-8DI-M8-3P 8086600 Digital Input Module
The Festo CPX-AP-I-8DI-M8-3P (part number 8086600) is a digital input module. Its product datasheet lists type of mounting as On DIN rail via accessories With through-hole and ambient temperature as -20 °C … 60 °C.
Key Features
- Type of mounting: On DIN rail via accessories With through-hole
- Ambient temperature: -20 °C … 60 °C
- Degree of protection: IP65 IP67
- Note on degree of protection: Unused connections sealed
Technical Data
| Brand | FESTO |
|---|---|
| Model | CPX-AP-I-8DI-M8-3P |
| Part number | 8086600 |
| Dimensions (W x L x H) | 30 mm x 170 mm x 35 mm |
| Type of mounting | On DIN rail via accessories With through-hole |
| Product weight | 126 g |
| Ambient temperature | -20 °C … 60 °C |
| Storage temperature | -40 °C … 70 °C |
| Relative air humidity | 5 – 95% Non-condensing |
| Degree of protection | IP65 IP67 |
| Note on degree of protection | Unused connections sealed |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Overvoltage category | II |
| Max. cable length | 30 m inputs 50 m system communication |
| Note on max. cable length | Power supply according to nominal voltage |
| Cleanroom suitability, measured according to ISO 14644-14 | Element installed statically, no meaningful evaluation possible according to ISO 14644-1 |
| KC mark | KC-EMV |
| Note on materials | RoHS compliant |
| Material housing | Makrolon® Nickel-plated die-cast zinc |
| Material o-ring | Fluoro rubber |
| Diagnostics via LED | Diagnostics per module Status per channel |
| Diagnostics per internal communication | Short circuit/overload in sensor supply Electronics/sensors overvoltage Electronics/sensors undervoltage |
| Communication interface, function | System communication XF10 IN / XF20 OUT |
| Communication interface, connection type | 2x socket |
| Communication interface, connection technology | M8x1, D-coded according to EN 61076-2-114 |
| Communication interface, plug pattern | 00995937 |
| Communication interface, number of pins/cores | 4 |
| Communication interface, protocol | AP |
| Communication interface, screened | Yes |
| Power supply, function | Incoming electronics/sensors and load |
| Power supply, connection type | Plug |
| power supply, connection system | M8x1, A-coded to EN 61076-2-104 |
| Power supply, connection pattern | 00991171 |
| Power supply, number of pins/wires | 4 |
| Power transmission, function | Outgoing electronics/sensors and load |
| Power transmission, connection type | Socket |
| Power transmission, connection technology | M8x1, A-coded to EN 61076-2-104 |
| Note regarding operating voltage | SELV/PELV fixed power supplies required Note the voltage drop |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Permissible voltage fluctuations for electronics/sensors | ±25% |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 32 mA |
| Reverse polarity protection | Yes |
| Electrical connection input, function | Digital input |
| Electrical connection input, connection type | 8x socket |
| Electrical connection input, connector system | M8x1, A-coded to EN 61076-2-104 |
| Electrical connection input, connection pattern | 00991871 |
| Electrical connection input, number of connections/cores | 3 |
| Fuse protection of inputs (short circuit) | Internal electronic fuse per module |
| Max. residual current of inputs per module | 1.8 A |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model CPX-AP-I-8DI-M8-3P, part number 8086600, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists degree of protection as IP65 IP67 for part number 8086600. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Application Review
When considering this digital input module for an industrial application, review the operating conditions of the equipment rather than relying on the product name alone. Confirm the required connections, available space, duty pattern, and surrounding environment. The final selection should follow the complete product specification and the machine manufacturer's requirements.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | CPX-AP-I-8DI-M8-3P |
| Part Number | 8086600 |
| Dimensions (W x L x H) | 30 mm x 170 mm x 35 mm |
| Type of mounting | On DIN rail via accessories With through-hole |
| Product weight | 126 g |
| Ambient temperature | -20 °C … 60 °C |
| Storage temperature | -40 °C … 70 °C |
| Relative air humidity | 5 – 95% Non-condensing |
| Degree of protection | IP65 IP67 |
| Note on degree of protection | Unused connections sealed |









