FESTO CPX-CTEL-4-M12-5POL 1577012 Electrical Interface
The Festo CPX-CTEL-4-M12-5POL (part number 1577012) is a electrical interface. Its product datasheet lists ambient temperature as -5 °C … 50 °C and degree of protection as IP65 IP67.
Description
FESTO CPX-CTEL-4-M12-5POL 1577012 Electrical Interface
The Festo CPX-CTEL-4-M12-5POL (part number 1577012) is a electrical interface. Its product datasheet lists ambient temperature as -5 °C … 50 °C and degree of protection as IP65 IP67.
Key Features
- Ambient temperature: -5 °C … 50 °C
- Degree of protection: IP65 IP67
- Electrical connection: 4x socket 5-pin A-coded M12
- Dimensions (W x L x H): 50 mm x 107 mm x 55 mm
Technical Data
| Brand | FESTO |
|---|---|
| Model | CPX-CTEL-4-M12-5POL |
| Part number | 1577012 |
| Protocol | I-Port |
| Dimensions (W x L x H) | 50 mm x 107 mm x 55 mm |
| Product weight | 110 g |
| Ambient temperature | -5 °C … 50 °C |
| Storage temperature | -20 °C … 70 °C |
| Degree of protection | IP65 IP67 |
| Corrosion resistance class CRC | (installed) |
| Max. cable length | 20 M |
| Note on materials | RoHS compliant |
| Material housing | Makrolon® |
| LED display | I-Port status / diagnostics Module status Load supply status System supply status |
| Diagnosis | Communication error Module short circuit Module-oriented diagnostics Undervoltage |
| Operator controls | DIL switch |
| Max. address volume, inputs | 32 Byte |
| Max. address volume, outputs | 32 Byte |
| Parameterisation | Diagnostic behaviour Fail-safe per channel Forcing per channel Idle mode per channel Module parameters Tool change mode |
| Internal cycle time | 1 ms per 1 byte of user data |
| Additional functions | Tool change mode |
| Electrical connection | 4x socket 5-pin A-coded M12 |
| Operational voltage range DC | 18 V … 30 V |
| Nominal operating voltage DC | 24 V |
| Intern power consumption nominal operating voltage | Typ. 65 mA |
| Power failure bridging | 10 ms |
| Max. total output current per channel | 4 x 1.6 A |
| Max. power supply per channel | 4 x 1.6 A |
| Isolation channel – channel | No |
| Isolation channel – internal bus | Yes, with intermediate air supply |
| Number of device interfaces | 4 |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model CPX-CTEL-4-M12-5POL, part number 1577012, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists electrical connection as 4x socket 5-pin A-coded M12 for part number 1577012. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | CPX-CTEL-4-M12-5POL |
| Part Number | 1577012 |
| Protocol | I-Port |
| Dimensions (W x L x H) | 50 mm x 107 mm x 55 mm |
| Product weight | 110 g |
| Ambient temperature | -5 °C … 50 °C |
| Storage temperature | -20 °C … 70 °C |
| Degree of protection | IP65 IP67 |
| Corrosion resistance class CRC | (installed) |
| Max. cable length | 20 M |









