FESTO VADMI-95-N 162529 Vacuum Generator
The Festo VADMI-95-N (part number 162529) is a vacuum generator. Its product datasheet lists nominal size, laval nozzle as 0.95 mm and measured variable as Relative pressure.
Description
FESTO VADMI-95-N 162529 Vacuum Generator
The Festo VADMI-95-N (part number 162529) is a vacuum generator. Its product datasheet lists nominal size, laval nozzle as 0.95 mm and measured variable as Relative pressure.
Key Features
- Nominal size, Laval nozzle: 0.95 mm
- Measured variable: Relative pressure
- Valve function: Closed
- Operating pressure: 0.2 MPa … 0.8 MPa
Technical Data
| Brand | FESTO |
|---|---|
| Model | VADMI-95-N |
| Part number | 162529 |
| Nominal size, Laval nozzle | 0.95 mm |
| Grid dimension | 18 mm |
| Silencer design | Closed |
| Mounting position | Any |
| Ejector characteristic | High vacuum |
| Grade of filtration | ≤40 µm |
| Manual override | Non-detenting |
| Integrated function | Ejector pulse valve, electric Flow control On/off valve, electric Filter Check valve Vacuum switch |
| Measured variable | Relative pressure |
| Measuring principle | Piezoresistive |
| Switching element function | N/O contact |
| Switching function | Threshold value comparator |
| Valve function | Closed |
| Reverse polarity protection | For all electrical connections |
| Display type | LED |
| Hysteresis setting range | -0.05 MPa … -0.005 MPa |
| Operating pressure | 0.2 MPa … 0.8 MPa |
| Operating pressure | 2 bar … 8 bar |
| Operating pressure | 29 psi … 116 psi |
| Nominal operating pressure | 0.6 MPa |
| Nominal operating pressure | 6 bar |
| Nominal operating pressure | 87 psi |
| Max. overload pressure | 5 bar |
| Air supply time at nominal operating pressure with ejector pulse | 2.04 s |
| Operational voltage range DC | 21.6 V … 26.4 V |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation not possible |
| Media temperature | 0 °C … 60 °C |
| Degree of protection | IP65 |
| Ambient temperature | 0 °C … 50 °C |
| Product weight | 250 g |
| Pressure measuring range | 0 MPa … 0.1 MPa |
| Pressure measuring range | 0 bar … 1 bar |
| Pressure measuring range | 0 psi … 14.5 psi |
| Electrical connection | M8x1 Plug |
| Type of mounting | With through-hole With female thread |
| Pneumatic connection, port 1 | G1/8 |
| Pneumatic connection, port 3 | Integrated silencer |
| Vacuum connection | G1/8 |
| Note on materials | RoHS compliant |
| Material seals | NBR |
| Material receiver nozzle | Nickel-plated brass |
| Material filter | PA |
| Material filter housing | Makrolon® |
| Material housing | Wrought aluminium alloy |
| Material silencer | Packaging unit POM |
| Material piston | POM |
| Material transmitter nozzle | Nickel-plated brass |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model VADMI-95-N, part number 162529, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists valve function as Closed for part number 162529. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | VADMI-95-N |
| Part Number | 162529 |
| Nominal size, Laval nozzle | 0.95 mm |
| Grid dimension | 18 mm |
| Silencer design | Closed |
| Mounting position | Any |
| Ejector characteristic | High vacuum |
| Grade of filtration | ≤40 µm |
| Manual override | Non-detenting |
| Integrated function | Ejector pulse valve, electric Flow control On/off valve, electric Filter Check valve Vacuum switch |






