ASCO E290A625 G2-1/2 DN65 Pneumatic Angle Seat Valve
The ASCO E290A625 is an E290 series, normally closed pneumatic angle seat valve with a G2-1/2 threaded process connection and DN65 nominal size. The supplied product photos identify the full model and inlet arrangement. This version uses fluid entry above the disc and a piston-operated actuator.
Description
Product Overview
The ASCO E290A625 is an E290 series, normally closed pneumatic angle seat valve with a G2-1/2 threaded process connection and DN65 nominal size. The supplied product photos identify the full model and inlet arrangement. This version uses fluid entry above the disc and a piston-operated actuator.
Key Features
- Normally closed 2/2-way process valve operated through a pneumatic piston actuator.
- G2-1/2 threaded connection and DN65 nominal size for matching the existing pipework.
- Angled-seat construction with fluid entry above the disc.
- Full model identification and multiple actual-product views support selection checks.
Technical Data
| Brand | ASCO |
|---|---|
| Model | E290A625 |
| Series | E290 |
| Product Type | Pneumatic angle seat valve |
| Valve Function | 2/2-way, normally closed |
| Process Connection | G2-1/2 |
| Nominal Diameter | DN65 |
| Body Material | Stainless steel |
| Flow Entry | Above the disc |
| Operator Diameter | 90 mm |
Application Notes
The catalogue groups this above-disc-entry construction with versions recommended for rapid-cycling steam applications. Suitability depends on the actual medium, pressure differential and temperature; do not assume that the same service limits apply to every fluid.
Model and Configuration Check
The E290A625 catalogue entry is listed under normally closed construction with fluid entry above the disc. Use the actual nameplate and the appropriate model row when checking pressure, temperature and pilot requirements.
Process operating pressure must be checked for the specific model and medium. A body pressure marking is not a substitute for the permitted operating differential. Pilot-fluid conditions must also be assessed separately from the service-fluid conditions.
Inquiry
For a quotation or model confirmation, provide the full model, quantity, destination, process medium, pressure, temperature and pilot-supply conditions. Nameplate photos can help compare the requested configuration with the existing installation.
Installation Position
The E290 installation section permits mounting in any position without affecting valve operation. The installation still needs suitable access for pipe connections, the pilot circuit and maintenance. Confirm the marked inlet direction before connecting the valve to the equipment.
Model Matching
Correct matching should rely on the complete model code rather than a few visible characters. Products in the same series can differ in suffix, thread size, voltage, material, or mounting configuration. Comparing the original label, manual, purchase record, and installation position improves selection accuracy.
Our Service Advantages
We supply industrial automation spare parts for customers in different markets and can arrange international delivery through FedEx, UPS, DHL, or another suitable express service according to order requirements. We aim to respond to model confirmation requests, replacement questions, photo comparisons, and basic technical enquiries within 24 hours. Where compatibility is uncertain, customers may provide photos of the original nameplate or equipment for an initial review.
Additional information
| Brand | ASCO |
|---|---|
| Model | E290A625 |
| Series | E290 |
| Product Type | Pneumatic angle seat valve |
| Valve Function | 2/2-way, normally closed |
| Process Connection | G2-1/2 |
| Nominal Diameter | DN65 |
| Body Material | Stainless steel |
| Flow Entry | Above the disc |
| Operator Diameter | 90 mm |









