FESTO SMT-8M-A-PS-24V-E-0,3-M8D 574334 Proximity Sensor
The FESTO SMT-8M-A-PS-24V-E-0,3-M8D (part number 574334) is a proximity sensor for T-slots. The product datasheet specifies a PNP normally open output and a 0.3 m cable with M8 plug.
Description
FESTO SMT-8M-A-PS-24V-E-0,3-M8D 574334 Proximity Sensor
The FESTO SMT-8M-A-PS-24V-E-0,3-M8D (part number 574334) is a proximity sensor for T-slots. The product datasheet specifies a PNP normally open output and a 0.3 m cable with M8 plug.
Key Features
- T-slot position sensing with magneto-resistive measurement.
- PNP normally open output; rated 24 V DC.
- 0.3 m cable with M8x1 A-coded plug.
Technical Data
| Brand | FESTO |
|---|---|
| Model | SMT-8M-A-PS-24V-E-0,3-M8D |
| Part number | 574334 |
| Product type | Proximity Sensor |
| Sensor design | For T-slot |
| Based on standard | EN 60947-5-2 |
| Special characteristics | Oil-resistant |
| Measured variable | Position |
| Measuring principle | Magneto-resistive |
| Ambient temperature | -40 °C … 85 °C |
| Repetition accuracy | 0.2 mm |
| Switching output | PNP |
| Switching element function | N/O contact |
| Switch-on time | ≤1.3 ms |
| Switch-off time | ≤7.3 ms |
| Max. switching frequency | 130 Hz |
| Max. output current | 100 mA |
| Max. output current using mounting kits | 100 mA |
| Max. switching capacity DC | 2.8 W |
| Max. switching capacity DC using mounting kits | 2.8 W |
| Voltage drop | <1.5 V |
| Short circuit current rating | Yes |
| Overload protection | Yes |
| Rated operational voltage DC | 24 V |
| Operational voltage range DC | 5 V … 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Cable with plug |
| Electrical connection 1, connector system | M8x1, A-coded, to EN 61076-2-104 |
| Electrical connection 1, number of connections/cores | 3 |
| Electrical connection 1, type of mounting | Screw-type lock Rotatable |
| Electrical connection 1, compatible type of mounting | Compatible with rotatable/non-rotatable screw-type lock |
| Connection outlet orientation | In-line |
| Material electrical contact | Gold-plated copper alloy |
| Material connector housing | TPE-U(PU) |
| Material screw-type lock | Brass, nickel-plated |
| Test conditions cable | Test conditions on request Torsional strength: > 300,000 cycles, ±270°/0.1 m Flexural strength: >50000 cycles, bending radius 5 mm Energy chain: > 5 million cycles, bending radius 28 mm |
| Cable length | 0.3 m |
| Cable characteristic | Suitable for energy chains/robot applications |
| Cable sheath colour | Grey |
| Material cable sheath | TPE-U(PUR) |
| Material insulating sheath | PP |
| Type of mounting | Screw-clamped Insertable in the slot from above |
| Max. tightening torque | 0.6 Nm |
| Mounting position | Any |
| Product weight | 8.9 g |
| Housing colour | Black |
| Material housing | Reinforced PA High-alloy stainless steel |
| Switching status indication | Yellow LED |
| Function reserve indication | Orange LED |
| Ambient temperature with moving cable | -20 °C … 85 °C |
| Degree of protection | IP65 IP68 IP69K |
Application Notes
Check the complete model and part number against the original equipment. Components and service kits in the same series may have different sizes, connections or configurations.
Selection and Installation
Confirm the selected variant, installation conditions and matching equipment documentation before ordering or fitting. Follow the manufacturer instructions for service and commissioning.
Inquiry
For a quotation, provide model SMT-8M-A-PS-24V-E-0,3-M8D, part number 574334, required quantity and destination. A clear photo of the existing nameplate or package can help confirm the item.
Sensor Installation Note
The product datasheet specifies a 0.3 m cable with M8x1 A-coded plug and screw-clamped mounting in a T-slot. Verify the PNP output, supply voltage and connection before fitting the sensor to the actuator.
Maintenance Inspection
Before replacing SMT-8M-A-PS-24V-E-0,3-M8D, examine the existing installation for issues that may affect the new part. Check the original label, ports, seals, fittings, cables, and mounting points as applicable. Finding a leak, worn connection, or loose contact before installation can help avoid repeating the same problem after replacement.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | SMT-8M-A-PS-24V-E-0,3-M8D |
| Part Number | 574334 |
| Sensor design | For T-slot |
| Based on standard | EN 60947-5-2 |
| Special characteristics | Oil-resistant |
| Measured variable | Position |
| Measuring principle | Magneto-resistive |
| Ambient temperature | -40 °C … 85 °C |
| Repetition accuracy | 0.2 mm |
| Switching output | PNP |









