FESTO CPE14-M1BH-5/3E-1/8 196935 Solenoid Valve
The FESTO CPE14-M1BH-5/3E-1/8, part number 196935, is a solenoid valve. Its product datasheet specifies 5/3 exhausted function, 24 V DC operation and a G1/8 working port.
Description
FESTO CPE14-M1BH-5/3E-1/8 196935 Solenoid Valve
The FESTO CPE14-M1BH-5/3E-1/8, part number 196935, is a solenoid valve. Its product datasheet specifies 5/3 exhausted function, 24 V DC operation and a G1/8 working port.
Key Features
- Valve function: 5/3 exhausted.
- Operating voltage 24 V DC; standard nominal flow 700 l/min.
- Working port G1/8; operating pressure 3 bar … 8 bar.
Technical Data
| Brand | FESTO |
|---|---|
| Model | CPE14-M1BH-5/3E-1/8 |
| Part number | 196935 |
| Product type | Solenoid Valve |
| Valve function | 5/3 exhausted |
| Type of actuation | Electrical |
| Construction width | 14 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 700 l/min |
| pneumatic working port | G1/8 |
| Operating voltage | 24 V DC |
| Operating pressure (MPa) | 0.3 MPa … 0.8 MPa |
| Operating pressure (bar) | 3 bar … 8 bar |
| Design | Piston gate valve |
| Type of reset | Mechanical spring |
| Degree of protection | IP65 With plug socket To IEC 60529 |
| Nominal size | 6 mm |
| Exhaust-air function | Can be throttled |
| Sealing principle | Soft |
| Mounting position | Any |
| Manual override | Detenting via accessory Non-detenting |
| Type of piloting | Piloted |
| Pilot air supply | Internal |
| Flow direction | Non-reversible |
| Valve position code | Label holder |
| Switching time off | 42 ms |
| Switching time on | 20 ms |
| Duty cycle | 100% in conjunction with holding current reduction |
| Max. positive test pulse with 0 signal | 1200 µs |
| Max. negative test pulse with 1 signal | 900 µs |
| Characteristic coil data | 24 V DC: 1.28 W |
| Permissible voltage fluctuations | -15% / +10% |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Media temperature | -5 °C … 50 °C |
| Ambient temperature | -5 °C … 50 °C |
| Product weight | 120 g |
| Electrical connection | 2-pin |
| Type of mounting | With through-hole |
| Pilot exhaust port 82 | M3 |
| Pilot exhaust port 84 | M3 |
| Pilot air port 12 | M3 |
| Pilot air port 14 | M3 |
| Pneumatic connection, port 1 | G1/8 |
| Pneumatic connection, port 2 | G1/8 |
| Pneumatic connection, port 3 | G1/8 |
| Pneumatic connection, port 4 | G1/8 |
| Pneumatic connection, port 5 | G1/8 |
| Material seals | NBR |
| Material housing | Die-cast aluminium |
Application Notes
Check the complete model and part number against the original equipment. Items in the same series may differ in dimensions, connections or operating configuration.
Selection and Installation
Confirm the selected variant and installation requirements with the equipment documentation. Follow the manufacturer instructions for service and commissioning.
Inquiry
For a quotation, provide model CPE14-M1BH-5/3E-1/8, part number 196935, quantity and destination. Clear photos of the existing item or package can help confirm the selection.
Valve Selection Note
The product datasheet lists 5/3 exhausted function, a G1/8 working port and 3 bar … 8 bar operating pressure for CPE14-M1BH-5/3E-1/8. Match the complete model and the 24 V DC coil to the existing valve before installation.
Delivery Inspection
Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | CPE14-M1BH-5/3E-1/8 |
| Part Number | 196935 |
| Valve function | 5/3 exhausted |
| Type of actuation | Electrical |
| Construction width | 14 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 700 l/min |
| pneumatic working port | G1/8 |
| Operating voltage | 24 V DC |
| Operating pressure (MPa) | 0.3 MPa … 0.8 MPa |
| Operating pressure (bar) | 3 bar … 8 bar |










