FESTO MFH-3-1/8 7802 Solenoid Valve

The FESTO MFH-3-1/8, part number 7802, is a solenoid valve. Its exact-model datasheet lists valve function as 3/2-way, single solenoid, closed and type of actuation as Electrical.

SKU: 7802 Category: Tags: , , Brand:

Description

FESTO MFH-3-1/8 7802 Solenoid Valve

The FESTO MFH-3-1/8, part number 7802, is a solenoid valve. Its exact-model datasheet lists valve function as 3/2-way, single solenoid, closed and type of actuation as Electrical.

Key Features

  • Valve function: 3/2-way, single solenoid, closed.
  • Type of actuation: Electrical.
  • Construction width: 26 mm.

Technical Data

Brand FESTO
Model MFH-3-1/8
Part number 7802
Product type Solenoid Valve
Valve function 3/2-way, single solenoid, closed
Type of actuation Electrical
Construction width 26 mm
Standard nominal flow rate (standardised to DIN 1343) 500 l/min
pneumatic working port G1/8
Operating voltage Via solenoid coil, must be ordered separately
Operating pressure 0.15 MPa … 0.8 MPa
Operating pressure 1.5 bar … 8 bar
Design Poppet seat
Type of reset Mechanical spring
Approval c UL us – Recognised (Oil)
Degree of protection IP65
Nominal size 5 mm
Grid dimension 27 mm
Exhaust-air function Can be throttled
Sealing principle Soft
Mounting position Any
Manual override Detenting
Type of piloting Piloted
Flow direction Non-reversible
lap Underlap
Switching time off 29 ms
Switching time on 9 ms
Max. positive test pulse with 0 signal 2200 µs
Max. negative test pulse with 1 signal 3700 µs
Characteristic coil data See solenoid coil, to be ordered separately
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 – Low corrosion stress
Storage temperature -20 °C … 60 °C
Media temperature -10 °C … 60 °C
Ambient temperature -5 °C … 40 °C
Product weight 240 g
Electrical connection Via F coil, to be ordered separately
Type of mounting Either: On manifold rail With through-hole
Pilot exhaust port 82 M5
Pneumatic connection, port 1 G1/8
Pneumatic connection, port 2 G1/8
Pneumatic connection, port 3 G1/8
Material seals NBR
Material housing Die-cast aluminium

Application Notes

Confirm the complete model and applicable part number against the installed equipment. Items from the same series may differ in dimensions or operating configuration.

Selection and Installation

Check the equipment documentation and the photographed item before ordering. Follow the manufacturer instructions for fitting and commissioning.

Inquiry

For a quotation, provide the model MFH-3-1/8, part number 7802, quantity and delivery destination. A clear photograph of the original item can help confirm selection.

Exact-Model Selection Check

The Festo product datasheet for MFH-3-1/8, part number 7802, lists valve function as 3/2-way, single solenoid, closed and type of actuation as Electrical. Confirm those details against the installed equipment before replacement.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

MFH-3-1/8

Product Type

Solenoid Valve

Part Number

7802

Valve function

3/2-way, single solenoid, closed

Type of actuation

Electrical

Construction width

26 mm

Standard nominal flow rate (standardised to DIN 1343)

500 l/min

pneumatic working port

G1/8

Operating voltage

Via solenoid coil, must be ordered separately

Operating pressure

1.5 bar … 8 bar