FESTO MHE2-MS1H-3/2G-QS-4 196135 Solenoid Valve

The FESTO MHE2-MS1H-3/2G-QS-4, part number 196135, is a solenoid valve. Its exact-model datasheet lists valve function as 3/2-way, single solenoid, closed and type of actuation as Electrical.

SKU: 196135 Category: Tags: , , Brand:

Description

FESTO MHE2-MS1H-3/2G-QS-4 196135 Solenoid Valve

The FESTO MHE2-MS1H-3/2G-QS-4, part number 196135, is a solenoid valve. Its exact-model datasheet lists valve function as 3/2-way, single solenoid, closed and type of actuation as Electrical.

Key Features

  • Valve function: 3/2-way, single solenoid, closed.
  • Type of actuation: Electrical.
  • Operating voltage: 24 V DC.

Technical Data

Brand FESTO
Model MHE2-MS1H-3/2G-QS-4
Part number 196135
Product type Solenoid Valve
Valve function 3/2-way, single solenoid, closed
Type of actuation Electrical
Construction width 10 mm
Standard nominal flow rate (standardised to DIN 1343) 100 l/min
pneumatic working port QS-4
Operating voltage 24 V DC
Operating pressure -0.09 MPa … 0.8 MPa
Operating pressure -0.9 bar … 8 bar
Operating pressure -13.05 psi … 116 psi
Design Pressure relief poppet valve
Type of reset Mechanical spring
Degree of protection IP65
Nominal size 2 mm
Grid dimension 14 mm
Note on grid dimension Minimum distance between the valves is 4 mm
Exhaust-air function Can be throttled
Sealing principle Soft
Mounting position Any
Manual override Non-detenting
Type of piloting Direct
Flow direction Reversible with restrictions
lap Underlap
Reverse polarity protection Bipolar
Additional functions Spark arresting Holding current reduction Protective circuit
Operating pressure, reversible -0.09 MPa … 0.1 MPa
Operating pressure, reversible -0.9 bar … 1 bar
Operating pressure, reversible -13.05 psi … 14.5 psi
Max. switching frequency 330 Hz
Switching time off 2 ms
Switching time on 1.7 ms
Tolerance switching time off +10%/-30%
Tolerance switching time on +10%/-30%
Switching time dispersion from 1 Hz 0.2 ms
Duty cycle 100%
Characteristic coil data 24 V DC: low-current phase 1.25 W, high-current phase 5.0 W
Permissible voltage fluctuations +/-10%
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Vibration resistance Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Restrictions for environmental and media temperature As a function of switching frequency (see graph)
Shock resistance Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC 2 – Moderate corrosion stress
Media temperature -5 °C … 60 °C
Ambient temperature -5 °C … 60 °C
Product weight 60 g
Electrical connection 2-pin Plug
Type of mounting With through-hole
Pneumatic connection, port 1 QS-4
Pneumatic connection, port 2 QS-4
Pneumatic connection, port 3 QS-4
Material seals HNBR NBR
Material housing Die-cast zinc, coated
Material screws Galvanised steel

Application Notes

Check the complete model and part number against the original equipment. Items in the same series may differ in dimensions, connections or operating configuration.

Selection and Installation

Confirm the selected variant and installation requirements with the equipment documentation. Follow the manufacturer instructions for service and commissioning.

Inquiry

For a quotation, provide model MHE2-MS1H-3/2G-QS-4, part number 196135, quantity and destination. Clear photos of the existing item or package can help confirm the selection.

Exact-Model Datasheet Check

The Festo datasheet for MHE2-MS1H-3/2G-QS-4, part number 196135, confirms valve function as 3/2-way, single solenoid, closed. Check installation and connection details against the existing equipment before replacement.

Full Model Verification

Use the full model code when confirming FESTO MHE2-MS1H-3/2G-QS-4 196135 Solenoid Valve. A shared series name does not mean two versions have the same voltage, port size, material, or mounting arrangement. Compare the original nameplate with the available datasheet, equipment records, and installation details to identify the exact version required.

Order Detail Confirmation

To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.

Additional information

Brand

FESTO

Model

MHE2-MS1H-3/2G-QS-4

Part Number

196135

Product Type

Solenoid Valve

Valve function

3/2-way, single solenoid, closed

Type of actuation

Electrical

Construction width

10 mm

Standard nominal flow rate (standardised to DIN 1343)

100 l/min

pneumatic working port

QS-4

Operating voltage

24 V DC

Operating pressure

-0.9 bar … 8 bar