FESTO QS-3/8-10 153008 Push-In Fitting
The FESTO QS-3/8-10, part number 153008, is a push-in fitting. Its exact-model datasheet lists pneumatic connection, port 1 as Male thread R3/8 and pneumatic connection, port 2 as For tubing outside diameter of 10 mm.
Description
FESTO QS-3/8-10 153008 Push-In Fitting
The FESTO QS-3/8-10, part number 153008, is a push-in fitting. Its exact-model datasheet lists pneumatic connection, port 1 as Male thread R3/8 and pneumatic connection, port 2 as For tubing outside diameter of 10 mm.
Key Features
- Pneumatic connection, port 1: Male thread R3/8.
- Pneumatic connection, port 2: For tubing outside diameter of 10 mm.
- Nominal size: 9 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | QS-3/8-10 |
| Part number | 153008 |
| Product type | Push-In Fitting |
| Size | Standard |
| Nominal size | 9 mm |
| Tubing insertion depth | 20.7 mm |
| Type of seal on screwed plug | Coating |
| Mounting position | Any |
| Design | Straight design |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |
| Operating pressure complete temperature range | -0.95 bar … 6 bar |
| Operating pressure complete temperature range | -13.775 psi … 87 psi |
| Temperature-dependent operating pressure | -0.095 MPa … 1.4 MPa |
| Temperature-dependent operating pressure | -0.95 bar … 14 bar |
| Temperature-dependent operating pressure | -13.775 psi … 203 psi |
| Note on operating pressure | Water: max. 0.6 MPa at max. 50°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free) |
| Note on operating and pilot medium | Lubricated operation possible |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Ambient temperature | -10 °C … 80 °C |
| Product weight | 24 g |
| Type of mounting | External hex SW17 |
| Pneumatic connection, port 1 | Male thread R3/8 |
| Pneumatic connection, port 2 | For tubing outside diameter of 10 mm |
| Colour of release ring | Blue |
| Material housing | Brass, nickel-plated |
| Material release ring | POM |
| Material tubing seal | NBR |
| Material tubing clamp component | High-alloy stainless steel |
Application Notes
Check the complete model and part number against the original equipment. Items in the same series may differ in dimensions, connections or operating configuration.
Selection and Installation
Confirm the selected variant and installation requirements with the equipment documentation. Follow the manufacturer instructions for service and commissioning.
Inquiry
For a quotation, provide model QS-3/8-10, part number 153008, quantity and destination. Clear photos of the existing item or package can help confirm the selection.
Exact-Model Datasheet Check
The Festo datasheet for QS-3/8-10, part number 153008, confirms pneumatic connection, port 1 as Male thread R3/8. Check installation and connection details against the existing equipment before replacement.
Functional Check After Replacement
After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | QS-3/8-10 |
| Part Number | 153008 |
| Product Type | Push-In Fitting |
| Size | Standard |
| Nominal size | 9 mm |
| Tubing insertion depth | 20.7 mm |
| Type of seal on screwed plug | Coating |
| Mounting position | Any |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |







