FESTO QS-4 153031 Push-In Connector

The FESTO QS-4, part number 153031, is a push-in connector. Its exact-model datasheet lists pneumatic connection, port 1 as For tubing outer diameter of 4 mm and pneumatic connection, port 2 as For tubing outside diameter of 4 mm.

SKU: 153031 Category: Tags: , , Brand:

Description

FESTO QS-4 153031 Push-In Connector

The FESTO QS-4, part number 153031, is a push-in connector. Its exact-model datasheet lists pneumatic connection, port 1 as For tubing outer diameter of 4 mm and pneumatic connection, port 2 as For tubing outside diameter of 4 mm.

Key Features

  • Pneumatic connection, port 1: For tubing outer diameter of 4 mm.
  • Pneumatic connection, port 2: For tubing outside diameter of 4 mm.
  • Nominal size: 2.8 mm.

Technical Data

Brand FESTO
Model QS-4
Part number 153031
Product type Push-In Connector
Size Standard
Nominal size 2.8 mm
Tubing insertion depth 14.9 mm
Mounting position Any
Design Straight design
Design Push-pull principle
Operating pressure complete temperature range -0.095 MPa … 0.6 MPa
Operating pressure complete temperature range -0.95 bar … 6 bar
Operating pressure complete temperature range -13.775 psi … 87 psi
Temperature-dependent operating pressure -0.095 MPa … 1.4 MPa
Temperature-dependent operating pressure -0.95 bar … 14 bar
Temperature-dependent operating pressure -13.775 psi … 203 psi
Note on operating pressure Water: max. 0.6 MPa at max. 50°C
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free)
Note on operating and pilot medium Lubricated operation possible
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature -10 °C … 80 °C
Product weight 4.7 g
Pneumatic connection, port 1 For tubing outer diameter of 4 mm
Pneumatic connection, port 2 For tubing outside diameter of 4 mm
Colour of release ring Blue
Material housing PBT
Material release ring POM
Material tubing seal NBR
Material tubing clamp component High-alloy stainless steel

Application Notes

Check the complete model and part number against the original equipment. Items in the same series may differ in dimensions, connections or operating configuration.

Selection and Installation

Confirm the selected variant and installation requirements with the equipment documentation. Follow the manufacturer instructions for service and commissioning.

Inquiry

For a quotation, provide model QS-4, part number 153031, quantity and destination. Clear photos of the existing item or package can help confirm the selection.

Exact-Model Datasheet Check

The Festo datasheet for QS-4, part number 153031, confirms pneumatic connection, port 1 as For tubing outer diameter of 4 mm. Check installation and connection details against the existing equipment before replacement.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

QS-4

Part Number

153031

Product Type

Push-In Connector

Size

Standard

Nominal size

2.8 mm

Tubing insertion depth

14.9 mm

Mounting position

Any

Design

Push-pull principle

Operating pressure complete temperature range

-0.95 bar … 6 bar