FESTO ADVU-16-10-P-A 156508 Compact Cylinder

The FESTO ADVU-16-10-P-A, part number 156508, is a compact cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: ADVU-16-10-P-A Category: Tags: , , Brand:

Description

FESTO ADVU-16-10-P-A 156508 Compact Cylinder

The FESTO ADVU-16-10-P-A, part number 156508, is a compact cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Stroke: 10 mm.
  • Piston diameter: 16 mm.
  • Piston rod thread: M4.

Technical Data

Brand FESTO
Model ADVU-16-10-P-A
Part number 156508
Product type Compact Cylinder
Stroke 10 mm
Piston diameter 16 mm
Piston rod thread M4
Cushioning Elastic cushioning rings/plates at both ends
Mounting position Any
Mode of operation Double-acting
Piston-rod end Female thread
Design Piston Piston rod
Position detection Via proximity switch
Operating pressure 0.12 MPa … 1 MPa
Operating pressure 1.2 bar … 10 bar
Operating pressure 17.4 psi … 145 psi
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 2 – Moderate corrosion stress
Ambient temperature -20 °C … 80 °C
Impact energy in end positions 0.1 J
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 90 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 121 N
Moving mass for 0 mm stroke 12 g
Additional moving mass per 10 mm stroke 4 g
Basic weight for 0 mm stroke 89 g
Additional weight per 10 mm stroke 15 g
Type of mounting With through-hole With accessories
Pneumatic connection M5
Material collar screws High-alloy stainless steel
Material cover Wrought aluminium alloy
Material dynamic seals NBR TPE-U(PU)
Material piston rod High-alloy stainless steel
Material cylinder barrel Wrought aluminium alloy

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model ADVU-16-10-P-A, part number 156508, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies ADVU-16-10-P-A as a compact cylinder under part number 156508. It lists stroke as 10 mm. Confirm the full variant before ordering.

Full Model Verification

Use the full model code when confirming FESTO ADVU-16-10-P-A 156508 Compact Cylinder. A shared series name does not mean two versions have the same voltage, port size, material, or mounting arrangement. Compare the original nameplate with the available datasheet, equipment records, and installation details to identify the exact version required.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

ADVU-16-10-P-A

Part number

156508

Product type

Compact Cylinder

Stroke

10 mm

Piston diameter

16 mm

Piston rod thread

M4

Cushioning

Elastic cushioning rings/plates at both ends

Mounting position

Any

Mode of operation

Double-acting

Piston-rod end

Female thread

Design

Piston Piston rod